Honeywell M9494 ユーザーズマニュアル

 5.37 

ADAPTER

BRACKET

FIG. 

 IN

install the Modutrol motor in any location except where

acid fumes or other deteriorating vapors might attack the

metal parts, or in atmospheres of escaping gas or the

explosive 

 excessive salt environments, mount-

ing base and screws should be zincorcadmium plated, not

stainless steel or brass: Use the 

 adapter bracket

for mounting on these surfaces.

Allow enough clearance for installing accessories and

servicing the motor when selecting a location. See Fig. 1.

 located outdoors, mount upright and use liquid-tight 

4

 connectors with wiring box to provide NEMA 3

weather protection.

Always install motors with the crankshaft horizontal.

Mounting flanges extending from the bottom of the

motor housing are drilled for 

 inch 

 machine

screws or bolts.

Motors are shipped from the factory in closed position

(at the limit of counterclockwise rotation as viewed from the
power end of the motor, as shown in Fig. 2) with the stroke

set at