Honeywell R8182D ユーザーズマニュアル

PRODUCT DATA

68-0105-2

® U.S. Registered Trademark
Copyright © 2002 Honeywell • All Rights Reserved

R8182D,E,F,H,J Combination

Protectorelay™ and Hydronic

Heating Controls

GENERAL

The R8182 is a combination Protectorelay™ intermittent

ignition oil burner primary and immersion type Aquastat®

controller for oil-fired, hydronic heating systems.

FEATURES

• Depending on model, these single unit devices provide

combinations of high limit, low limit, and circulator

control.

• All models use a 24V thermostat and C554A Cadmium

Sulfide Flame Detector.

• R8182D,E,H and J have auxiliary terminals ZC and ZR

for circulator zone control. Additional zones require a

separate 24V thermostat and R845 Relay.

• All models have capability for zone control with zone

valves. Each additional zone requires a separate 24V

thermostat and a V8043 or V8044 Zone Valve.

• Ideal for packaged boiler systems requiring compact,

multipurpose controls.

• R8182D,E,F mode
• R8182H,J models mount on a 4 x 4 inch junction box,

and have a 5 ft (1.5m) armored capillary for remote

sensor location.

• Aquastat® Controller section is field replaceable.
• Oil burner circuit includes an improved safety shutoff

in the event the burner fails to start.

• Flame failure during the running cycle results in a

45 second attempt to restart. If unsuccessful, safety

shutoff occurs, requiring manual reset before burner

can be restarted.

Contents