Sterling 90-225 CFM ユーザーズマニュアル

 

 

Cabinet Series Dehumidifying Dryer 

 

22 

The following indicators are located inside the dryer cabinet.  See Figures 5, 6, and 7. 

System 
Start/Sequence 
Shutdown (I/0) 

When ON, activates the operation of the dryer 
portion. 

Compressed Air 
Input (I/1) 

When ON, confirms that compressed air is present. 

Process Blower 
Enable (I/2) 
 

When ON, Confirms the operation of the process 
blower. 

Bed Switch Set 
Point Input (I/4) 
 

When ON, indicates that dewpoint is above bed 
switching set point. 

High Regen 
Temp Alarm, 
Right Bed (I/5) 
 

When OFF, indicates a situation of a temperature 
exceeding the set level in the right regen bed. 

 
High Regen 
Temp Alarm, 
Left Bed (I/6) 
 

When OFF, indicates a situation of a temperature 
exceeding the set level in the right regen bed. 

Compressed Air 
Alarm Input (I/7) 
 

When ON, it indicates loss of compressed air. 

High Process 
Temp Alarm (I/8) 
 

When ON, sends the information to the PLC to be 
used later in forming alarm procedure. 

Push To Silence 
(I/9) (Optional) 
 

When the existing rocker switch is pressed, the 
audible horn will be silenced and flashing strobe 
will be turned off. Also, it serves as an alarm 
acknowledgment.