HP (Hewlett-Packard) 20-Feb ユーザーズマニュアル

178 Upgrading Firmware

Chapter 5

Note

The firmware download may take several minutes to complete.

Using the Remote Management Card (library and LTO drive firmware)

All library components, except drives, can be easily downloaded from the

remote management card.

Note

The firmware file is available from HP Support at http://

www.hp.com/go/support. These files must be loaded onto the

local host computer before downloading firmware. First select

your product, and then make a selection from the

Downloads &

Drivers

pull-down menu.

1. Once the library is configured for network access, enter the IP address

within your web browser to launch the Web-Based Library Administrator

pages. (See

Note

The library administrator password is required for this process

and is not set by default. If the password is not set, you will not

be permitted to download firmware.

2. Select

the

[Configuration] tab from the main screen.

3. Select

the

[Firmware Download] button.

4. Enter the full pathname for the download file, or use the [Browse] button

to locate the file.

5. Select

the

[Start Firmware Download] button to begin the actual process

of downloading the library firmware.
Once the download process begins, the progress and status of the

download will display on the lower half of your screen.

Note

The firmware download may take several minutes to complete.