HP (Hewlett-Packard) 20-Feb ユーザーズマニュアル

ページ / 238
Glossary 225
Glossary
S
SCSI
Small Computer Systems Interface - A bus that transfers data between the host 
system and the library.
SCSI ID
The electronic identification number for each SCSI device in the library. The 
library SCSI devices are the drives and the library interface controller card.
SCSI element
reservation
This allows the host to continue reserving drive or slots after a power cycle. This 
is typically used to ensure that only one host can access a slot or drive.
single-ended SCSI
A type of cable that is limited to short distances.
soft error
Electronic errors in library functions that can be recovered. These errors are 
recorded in the soft error log.
soft keys
Five buttons located along the bottom edge of the front panel display that are 
used to execute commands on the display.
swap
Two related library actions, or moves, such as moving a tape from a slot to a 
drive, and then back to a slot.
switch
A device that provides a (n by n) interconnect to allow a port to have full 
communication bandwidth with any other port while other communications 
are occurring.
T
tape, tape cartridge
The media that the library uses for recording data from the host computer(s).
TCP/IP
Transmission Control Protocol/Internet Protocol
terminator
An electronic device that connects to the end of the SCSI bus to stabilize bus 
signals.
tray
The area of the library that contains the magazines, Each level of the library 
has two trays. Also referred to a drawer.
U
Ultrium
A tape format specification for the high capacity implementation of LTO 
technology.