Philips AC4083 ユーザーズマニュアル

Replacing the filters and resetting the appliance

Tip: Place the appliance against a wall for more stability when you remove or

insert filters.

Switch off the appliance and unplug it.

Follow the instructions in chapter ‘Before first use’, section ‘Placing

the filters’ to remove old filters and place new filters.

Note: Always use a new filter to replace an old filter.
Note: Make sure you reattach the front panel properly.

Put the plug in the wall socket.

Press the on/off button to switch on the appliance.

, The speed light under the filter number concerned and the

REPLACE FILTER lights still flash or still light up continuously when

you switch on the appliance.

, If the appliance was locked before you replaced the filter or filters,

the appliance is still locked.

Reset the appliance to switch off the filter replacement indication or

to unlock the appliance

- Press and hold the SPEED button for 3 seconds

- You hear a ding-ding sound to indicate that the appliance has been

reset.

Note: Make sure the appliance is switched on when you reset it.

Accessories

New filters are available under the following type numbers:

Filter

Type number

Filter 2: multi-care filter

AC4141

Filter 3: activated carbon filter

AC4143

Filter 4: HEPA filter

AC4144

Filter 5: humidification filter

AC4145

Filter 6: water softener

AC4146

Environment

- Do not throw away the appliance with the normal household waste

at the end of its life, but hand it in at an official collection point for

recycling. By doing this, you help to preserve the environment.

3 sec.

English