Chamberlain WD962KPEV ユーザーズマニュアル
18
Install the door bracket
8
Installation
ONE-PIECE DOORS
Option B
8.1B
Center the door bracket on the top
of the door, in line with the header
bracket as shown.
bracket as shown.
8.2B
Mark either the left and right, or the
top and bottom holes.
Metal
Doors:
• Drill 3/16" pilot holes and fasten
the bracket with the self-threading
screws (H16) provided.
screws (H16) provided.
Wood
Doors:
• Drill 5/16" holes and use 5/16"x2"
carriage bolts, lock washers and nuts
(not provided) or 5/16"x1-1/2" lag
screws (not provided) depending on
your installation needs.
(not provided) or 5/16"x1-1/2" lag
screws (not provided) depending on
your installation needs.
NOTE: The door bracket may be
installed on the top edge of the door
if required for your installation. (Refer
to the dotted line optional placement
drawing.)
if required for your installation. (Refer
to the dotted line optional placement
drawing.)
For a door with no exposed framing, or for the
optional installation, use lag screws 5/16"x1-1/2"
(not provided) to fasten the door bracket.
optional installation, use lag screws 5/16"x1-1/2"
(not provided) to fasten the door bracket.
Vertical
Centerline
of Garage
Door
Centerline
of Garage
Door
Optional
Placement
of Door
Bracket
Placement
of Door
Bracket
Door Bracket
Header Bracket
Header Wall
2x4 Support
(Finished Ceiling)
H16
Door
Bracket
Bracket
Top of Door
(Inside Garage)
(Inside Garage)
Top Edge of
Door
Door
Optional
Placement
Placement
Optional
Placement
Placement
Top Edge
of Door
of Door
Top of Door
(Inside Garage)
(Inside Garage)
Door
Bracket
Bracket
Carriage Bolt 5/16"x2"
(not provided)
(not provided)
Nut 5/16"-18
Lock Washer 5/16"
Metal Door
Wood Door