Avalon Stoves Flush Wood Insert ユーザーズマニュアル

© Travis Industries

100-01157

4041116

The surround panels are available in two sizes shown below.

Width

Height

Part#

8" Panels

45-1/2"

29-1/2"

99300240

10" Panels

49-1/2"

31-1/2"

99300241

12" Panels

53-1/2"

33-1/2"

99300242

FOR INSIDE FIT PANELS ONLY: the panels may be cut down to fit within the fireplace - see directions below.

Do not cut more than 4" 

from each side panel.

The rheostat is mounted 

into the side panel.  It 

requires 1/8" and 3/8" 

diameter holes to be 

drilled into the panel.  

Position the rheostat a 

minimum 3" away from 

the insert.

4" Min.

7/16"

1.  Before installing the side panels, position the insert over the hearth (not inside the fireplace).  You

may wish to place something under the insert to prevent scratching (cardboard).  Install the side
panels following the directions below.

Run the 

rheostat wires 

behind the 

surround panel 

(cut the lock-tie 

holding them in 

place).

Attach the surround panels with the 6 screws included with the fireplace insert.

HINT: Before installing the panels, pre-thread the holes in the side of the insert (use the self-

threading screws).

Run the power cord behind the surround panel 

(cut the lock-tie holding it in place).