Avalon Stoves Flush Wood Insert ユーザーズマニュアル
6
Features & Specifications
© Travis Industries
100-01157
4041116
Installation Options:
•
Masonry Fireplace Insert
WARNING: Do not install this fireplace insert into a
factory-built metal (Z.C.) fireplace.
factory-built metal (Z.C.) fireplace.
Features:
•
EPA Phase II Approved
•
2.9 Cubic Foot Firebox Volume
•
Single Operating Control
•
Accepts Logs Up to 24" Long
•
Steel Plate Construction (5/16" & 1/4")
•
Heavy Duty Refractory Firebrick
•
Standard High-Tech Blower
•
Five Sided Convection Chamber
Heating Specifications:
Approximate Maximum Heating Capacity (in square feet)*
1,200 to 2,000
Maximum BTU's per Hour (Cord Wood Calculation)
73,300
Overall Efficiency (Oregon Method)
71.1 %
Maximum Burn Time
Up to 12 Hours
* Heating capacity will vary depending on the home's floor plan, degree of insulation, and the outside
temperature. It is also affected by the quality and moisture level of the fuel.
temperature. It is also affected by the quality and moisture level of the fuel.
Dimensions:
5-5/8"
Weight 450 Lbs.
Fireplace Opening
21-1/4"
11-1/8"
1-1/4”
NOTE:
Clearances are
measured from the base
of the fireplace insert.
6" Diameter Flue Vent
20-1/2"
21-1/2"
28-7/8"
Electrical Line
(may be re-routed
to opposite side)
(may be re-routed
to opposite side)
Figure 1
Emissions:
4.1 Grams Per Hour (EPA Phase II Approved)