Lennox Hearth Designer プリント

ページ / 1
DOUBLE DOOR SCREEN FACE KIT
MODELS DESIGNER™ AND RAVENNA™
INSTALLATION INSTRUCTIONS FOR INSTALLING DOUBLE DOOR SCREEN FACE 
KITS FOR USE wITh DESIGNER AND RAVENNA GAS FIREPLACE INSERTS
775,278M 
Rev. A, 10/2008
HEARTH PRODUCTS
KITS AND ACCESSORIES
DR
AF
T
10
/08
/20
08
KIT CONTENTS (See Figure 1):
1 ea.  Black Screen Face Assembly 
1 ea.   Instruction Sheet
TOOLS NEEDED:
None
Read this instruction sheet in its entirety before beginning the installa-
tion.
All of these parts may scratch and bend, great care should be used 
in handling them.
ALL  wARNINGS  AND  PRECAUTIONS  IN  ThE  INSTALLATION  AND 
OPERATION  MANUAL  PROVIDED  wITh  ThE  APPLIANCE  APPLY  TO 
ThESE INSTRUCTIONS.
TURN OFF ThE APPLIANCE AND ALLOw IT TO COMPLETELY COOL 
BEFORE PROCEEDING.
INSTALLATION INSTRUCTIONS
The four hanging brackets are pre-mounted onto the back of the screen 
face. To install the screen face on the Designer or Ravenna gas insert, align 
the four hanging brackets with their corresponding mounting brackets, 
located on the left and right side of the insert. Set the hanging brackets 
onto the mounting brackets and slide the face down until the brackets 
are fully seated (see Figure 1).
Cat. No.
Model
Description
75028
SCREEN-DBV-RDV
Screen Face/Double Door/Black
Figure 1
1
GENERAL INFORMATION
If you encounter any problems, need clarification of these instructions 
or are not qualified to properly install this kit, contact you local distribu-
tor or dealer.
Printed in U.S.A. © 2008 Lennox hearth Products
P/N  775,278M  Rev. A  10/2008
Lennox Hearth Products reserves the right to make changes at any time, without notice, in design, materials, specifications, prices and also to discontinue colors, styles and products. Consult 
your local distributor for fireplace code information.
Lennox hearth Products
1110 west Taft Avenue • Orange, CA  92865
NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE.