Lennox Hearth Radium-NG ユーザーズマニュアル

ページ / 18
3
.0 GENERAL INFORMATION
This appliance is a high efficiency, unvented, flame effect gas heater.  
It provides radiant and convected warmth both efficiently and safely 
utilizing the latest type catalytic convertor burner technology. The 
appliance does not require a flue system of any type as the catalytic 
converter cleans the flue products to provide a complete combustion 
system, which is intrinsically safe.
3.0 PACKAGING LIST
Quantity       Description
 
    1 
     Firebox, Burner & Curved Rear Frame Assembly
     1  
     Installation and operation instructions
     1 
     Glass Facia Panel Assembly
   1 
     Screw And Wall Plug Pack
   1 
     Rubber Grommet
   1 
     Fitting Template
   1 
     Wall Mounting Plate
4.0 APPLIANCE SPECIFICATIONS
CONGRATULATIONS ON THE PURCHASE OF YOUR NEW 
GAS APPLIANCE MANUFACTURED BY LENNOX HEARTH 
PRODUCTS.
When you purchased your new gas fireplace, you joined the ranks of 
thousands  of  individuals  whose  answer  to  their  home  heating  needs 
reflects their concern for efficiency and our environment. We extend our 
continued support to help you achieve the maximum benefit and enjoy-
ment available from your new gas fireplace. It is our goal at Lennox Hearth 
Products to provide you, our valued customer, with an appliance that will 
ensure years of trouble-free warmth and pleasure. 
Thank you for selecting a Lennox Hearth Products gas fireplace as the 
answer to your supplemental home heating needs.
Sincerely, All of us at Lennox Hearth Products
TABLE OF CONTENTS
Section  Contents       
                        Page No.
  1.0 
Safety And Warning Information . . . . . . . . . . . . .  2
  2.0 
General Information . . . . . . . . . . . . . . . . . . . . . . .  3
  3.0 
Packaging List . . . . . . . . . . . . . . . . . . . . . . . . . . .  3
  4.0 
Appliance Specifications . . . . . . . . . . . . . . . . . . .  3
  5.0 
Unpacking the Appliance . . . . . . . . . . . . . . . . . . .  4
  6.0 
Burn-in Period . . . . . . . . . . . . . . . . . . . . . . . . . . .  4
  7.0 
Codes, Massachusetts & New York . . . . . . . . . . .  4
  8.0 
Combustion And Ventilation Air. . . . . . . . . . . . . .  5
  9.0 
Site Requirements . . . . . . . . . . . . . . . . . . . . . . . .  6
  10.0  Preparing The Appliance . . . . . . . . . . . . . . . . . . .  6
  11.0  Mounting The Appliance . . . . . . . . . . . . . . . . . . .  7 
  12.0  Checking The Burner . . . . . . . . . . . . . . . . . . . . . .  8
  13.0  Connecting A Gas Line  . . . . . . . . . . . . . . . . . . . .  8
  14.0  Checking The Gas Connections . . . . . . . . . . . . . .  9
  15.0  Gas Pressure Check . . . . . . . . . . . . . . . . . . . . . . .  9 
  16.0  Spark Gap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  10
  17.0  Fitting The Glass Facia. . . . . . . . . . . . . . . . . . . . .  10 
  18.0  Briefing The Customer. . . . . . . . . . . . . . . . . . . . .  10
  19.0  Servicing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  11
  20.0  Servicing The Burner. . . . . . . . . . . . . . . . . . . . . .  11
  21.0  Pilot Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . .  11
  22.0  Catalysts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  12
  23.0  Testing For Firebox Leakage  . . . . . . . . . . . . . . . .  12 
  24.0  Cleaning. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  12
  25.0  Lighting Instructions & Turning Off Appliance . . .  13
  26.0  Troubleshooting Guide. . . . . . . . . . . . . . . . . . . . .  14
  27.0  Replacement Parts List . . . . . . . . . . . . . . . . . . . .  15 
  28.0  Positioning Of Field Assembled Parts . . . . . . . . .  16
  29.0  Specifications  . . . . . . . . . . . . . . . . . . . . . . . . . . .  17
  30.0  Product Reference Information . . . . . . . . . . . . . .  18
These heaters are fitted with a specially designed pilot utilizing an 
oxygen depletion sensor (ODS) which responds to the amount of 
oxygen  available  in  the  room  and  shuts  the  heater  off  before  the 
oxygen level drops below 18%. It must not be adjusted or put out 
of operation. If replaced then manufacturers original parts must be 
used. The pilot can be relit only when fresh air is available. Refer to 
the Combustion and Ventilation Air section.
The appliance is designed to fit various types of situations as listed 
in the Installation Requirements.  
This appliance is factory set for operation on the gas type, and at the 
pressure stated on the appliance rating plate.
Read all these instructions before commencing installation. All instruc-
tions must be left in the possession of the user for safekeeping.
Gas Type
Natural Gas
Propane Gas (LP)
Gas inlet pressure
 
Max.
 
Min.
10.5” w.c.
6” w.c.
13” w.c.
11” w.c.
Regulator Pressure Setting
5” w.c.
10” w.c.
Max Energy Input
8,870 BTU/hour
7,500 BTU/hour
Min Energy Input
5,110 BTU/hour
5,110 BTU/hour
Pilot Energy Input
560 BTU/hour
560 BTU/hour
Burner Pressure
 
High
(manifold)
 
Low
3.5” w.c. 
1.1” w.c. 
5.6” w.c.
.9” w.c.
Main burner flow restrictor
(burner orifice)
1.45mm (0.057”)
1.03mm (0.04”)
Oxypilot
SIT/Bray 908
SIT/Bray 984
Gas Inlet Connection
3/8” NPT at regulator
3/8” NPT at regulator
Ignition
Piezo spark
Piezo spark
Spark Gap
1/8” - 3/16”
1/8” - 3/16”
Please see Data Plate affixed to appliance for current data. This appliance is for use 
only with the gas type, and at the pressure stated on the appliance Data Plate.
Table 1