Lennox Hearth Ravelle 42 プリント

screen face kit

MODeL raVeLLe™ 42

instaLLatiOn instrUctiOns fOr instaLLinG screen
face kit fOr Use with the raVeLLe™ 42 Gas firePLace

775,289M

rev. a, 10/2008

HEARTH PRODUCTS

KITS AND ACCESSORIES

kit cOntents (see Figure 1):

Please ensure that all these parts are included

1 ea. Screen Face [Complete] (A)

1 ea. Two Upper Brackets w/Screws (B)

1 ea. Two Lower Brackets w/Speed Nuts (C)

1 ea. Mounting Hardware (D)

- 6 ea. #10 Washers

- 6 ea. 10-24 Hex Nuts

- 4 ea. 10-24 Allen Head Screws

- 2 ea. 1/4” 20 Phillips Head Screws

1 ea. Instruction Sheet

cat. no.

Model

Description

75029

screen-42

screen face, Double Door, Black

nOte: DiaGraMs & iLLUstratiOns are nOt tO scaLe

Figure 1

- Kit Contents

tOOLs neeDeD:

Phillips Head Screw Driver

3/8” Socket/nut Driver

5/32” Allen Wrench or T-Handle Wrench

GeneraL infOrMatiOn

If you encounter any problems, need clarification of these instructions

or are not qualified to properly install this kit, contact you local distribu-

tor or dealer.
Read this instruction sheet in its entirety before beginning the installa-

tion.
all of these parts may scratch and bend, great care should be used

in handling them.
aLL warninGs anD PrecaUtiOns in the instaLLatiOn anD

OPeratiOn ManUaL PrOViDeD with the aPPLiance aPPLY tO

these instrUctiOns.
tUrn Off the firePLace anD aLLOw it tO cOMPLeteLY cOOL

BefOre PrOceeDinG.

instaLLatiOn instrUctiOns

step 1. Ensure the reveal corner is positioned as shown in Figure 1. If it

needs to be adjusted to the position shown in Figure 1, see Page

12 of the Installation and Operation Manual.

Figure 2

reveal corner

adjustment

for arch face

OnLY

Reveal Corner Adjusted

for Arch Face

Reveal Corner

reveal corner

expanded View of

reveal corner

wrOnG