Lennox Hearth ADAGIO-AG プリント

NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE.

HEARTH PRODUCTS

KITS AND ACCESSORIES

750,231M
REV. NC 06/2008

INSTALLATION INSTRUCTIONS FOR FACADE KITS
FOR USE wITh ADAGIO™ DIRECT-VENT GAS FIREpLACES

KIT CONTENTS:

Facade Kit

1 ea. Facade Assembly (1)

1 ea. Instruction Sheet

INSTALL ONLY whEN FIREpLACE IS OFF AND COOL.

ALL wARNINGS, pRECAUTIONS AND INSTRUCTIONS pROVIDED

IN ThE INSTALLATION INSTRUCTIONS MANUAL AND ThE CARE

AND OpERATION MANUAL pROVIDED wITh ThE AppLIANCE AppLY

TO ThESE INSTRUCTIONS. ThOROUGhLY READ AND FOLLOw

ThE INSTRUCTIONS pROVIDED wITh ThE AppLIANCE BEFORE

pROCEEDING TO ThE FOLLOwING INSTRUCTIONS.

INSTALLATION INSTRUCTIONS

1. Install the appliance, firebox liner and logs per the Installation Instruc-

tions Manual provided with the appliance and the Installation Instruction

Sheet provided with the firebox liner kit (sold separately).

2. Using a 3/8” socket or nutdriver, remove heat shield, screen retainer and

screen from facade. See Figure 2.

Cat. No Model

Description

h5773 ADAGIO-AG

Arched Face Black Facade

h5774 ADAGIO-pF

Arched Face Brushed Nickel Facade

The arched facade kits require a filigree inset kit. These kits are sold

separately. Contact your dealer for ordering information.

Filigree Inset Kits (Sold Separately - Required)

Cat. No.

Model

Description

H6845

ADAGIO-INSET-ASPEN-BK

Aspen, Black

H6846

ADAGIO-INSET-ASPEN-BN

Aspen, Brushed Nickel

H6847

ADAGIO-INSET-ASPEN-BKN

Aspen, Black Nickel

H6848

ADAGIO-INSET-ASPEN-G

Aspen, Gold

H6849

ADAGIO-INSET-NAPA-BK

Napa, Black

H6850

ADAGIO-INSET-NAPA-BN

Napa, Brushed Nickel

H6851

ADAGIO-INSET-NAPA-BKN

Napa, Black Nickel

H6852

ADAGIO-INSET-NAPA-G

Napa, Gold

H6853

ADAGIO-INSET-TUSCAN-BK

Tuscan, Black

H6854

ADAGIO-INSET-TUSCAN-BN

Tuscan, Brushed Nickel

H6855

ADAGIO-INSET-TUSCAN-BKN

Tuscan, Black Nickel

H6856

ADAGIO-INSET-TUSCAN-G

Tuscan, Gold

Filigree Inset Kit

1 ea. Upper Filigree inset (2)

1 ea. Lower Filigree inset (3)

7 ea. Washers #10 (4)

7 ea. Hex Head Nuts (5)

Installer: Leave This Instruction Sheet With The Appliance.

Consumer: Retain This Instruction Sheet For Future Reference.

Figure 1

TOOLS / SUppLIES NEEDED:

3/8” Socket or Nutdriver

GENERAL INFORMATION

The arched facade kits are offered in two attractive finishes, black and

brushed nickel. If you encounter any problems or need clarification of

these instructions, contact you local distributor or dealer.

Note: The base of the appliance will need to be elevated by 3/4" minimum

above the floor to allow for the proper fit of the facade (i.e. 3/4" board as

platform). See Installation Instructions Manual.

FPO

7 Places