Martin Fireplaces 400BWBCIA ユーザーズマニュアル
61D0008
3
INSTALLER
Please leave these instructions with the owner.
Please leave these instructions with the owner.
OWNER
Please retain these instructions for future reference.
Please retain these instructions for future reference.
IMPORTANT SAFETY INFORMATION
This fireplace is NOT designed for installation in manufactured homes without a vented
attic space. Fireplace may be installed in manufactured homes which have a vented
attic space if the fireplace is equipped with GD36BA, GD36PBA, GD36SSA, GD42BA,
GD42PBA or GD42SSA glass doors, an AK6 outside combustion air kit (instead of the
AK4 outside combustion air kit offered for residential type homes as described later
by this instruction manual), a SVTR firestop thimble, and the minimum installed height
from floor to flue outlet is 13'. (See Figure 14, page 16.)
attic space. Fireplace may be installed in manufactured homes which have a vented
attic space if the fireplace is equipped with GD36BA, GD36PBA, GD36SSA, GD42BA,
GD42PBA or GD42SSA glass doors, an AK6 outside combustion air kit (instead of the
AK4 outside combustion air kit offered for residential type homes as described later
by this instruction manual), a SVTR firestop thimble, and the minimum installed height
from floor to flue outlet is 13'. (See Figure 14, page 16.)
NOTICE
Do not use a fireplace insert or other
product not specified for use with
this fireplace.
product not specified for use with
this fireplace.
CAUTION
Improper installation or use of this fireplace will void its warranty and can cause:
• Damage to the fireplace from overheating.
• Hazardous temperatures to develop on combustible materials adjacent to the fireplace
• Damage to the fireplace from overheating.
• Hazardous temperatures to develop on combustible materials adjacent to the fireplace
or chimney.
• The emission of smoke, sparks or hazardous gases into the dwelling.
• Leakage of rain water into the dwelling.
• Leakage of rain water into the dwelling.
W
ARNING
• Read these instructions entirely before beginning any part of the installation. Save
these instructions for any future repairs.
• Use these instructions as a guide during the installation of the fireplace.
• Install all the parts used with this fireplace system in accordance with these installation
• Install all the parts used with this fireplace system in accordance with these installation
instructions. Failure to do so may be hazardous and will void the warranty.
• Do not alter fireplace and accessories in any way that is not specifically recommended
in this manual.
• Refer to your local building code for local requirements pertaining to installation of
factory-built fireplaces. Martin Hearth and Heating fireplaces are intended for installation
and use according to standard NFPA 211 of the National Fire Protection Association.
and use according to standard NFPA 211 of the National Fire Protection Association.
• Do not install fireplace with a masonry flue.
• Do not pack required air spaces with combustible material or insulation not specifically
• Do not pack required air spaces with combustible material or insulation not specifically
recommended for use in such areas.
W
ARNING