Haier ESA424J-L ユーザーズマニュアル

4.     Adjust the temperature between 61ºF and 86ºF (16ºC and 

30ºC).

       NOTE: In Fan mode, the temperature cannot be set.

5.    Wait 3 seconds before turning off the air conditioner.

6.     Press TIMER. Timer On indicator light on the air conditioner 

control panel will flash. Display will show remaining hours 
before the air conditioner will turn on.

7.     Press the TEMP/TIME up or down arrow button to change 

the delay time from 1 hour to 24 hours.

8.     Timer On indicator light on the air conditioner control panel 

will remain on. 

NOTE: Air conditioner can be either on or off.

1.     Press TIMER once after it has been programmed. Display on 

the air conditioner control panel will show remaining time.

2.     While the display is showing the remaining time, press 

TIMER untill Timer indicator light turns off.

1.     Press TIMER once after it has been programmed. Display on 

the air conditioner control panel will show remaining time.

2.     While the display is showing the remaining time, press 

the TEMP/TIME up or down arrow button to increase or 
decrease the time.

3.     After 5 seconds, the display on the air conditioner control 

panel will show the current room temperature.

Your new air conditioner is designed to give you many years of
dependable service. This section tells you how to clean and care
for your air conditioner properly. 

The air filter is removable for easy cleaning. A clean filter helps
remove dust, lint, and other particles from the air and is  
important for best cooling and operating efficiency. Check the 
filter every 2 weeks to see whether it needs cleaning.

NOTE: Do not operate the air conditioner without the filter in
place.

1.   Turn off the air conditioner.

2.    Remove the air filter by opening the front panel and removing 

the air filter.

When your air conditioner is operating normally, you may hear
sounds such as:

■

   Droplets of water hitting the condenser, causing a pinging or 

clicking sound. The water droplets help cool the condenser.

■

  Air movement from the fan.

■

  Clicks from the thermostat cycle.

■

  Vibrations or noise due to poor wall or window construction.

■

   A high-pitched hum or pulsating noise caused by the modern 

high-efficiency compressor cycling on and off.

4-Way Air Flow:The air directional louvers let you control the 

direction of the airflow to the desired direction.The airflow can be 

directed up-down,left-right.

Vent:The Fresh air vent allows the air conditioner to recirculat 

inside air,draw fresh air into the room and exhaust stale air to the  

outside.