Samsung AWT12P1HEA ユーザーズマニュアル

E-

If you orient the air flow blades downwards and the unit operates
in Cool mode for long periods of time, dew may:

Form on the surface of the blades
Drip from the blades

Adjusting the Air Flow Direction Horizontally

Adjusting the Air Flow Direction Vertically

HSI

Depending on the position of the unit in your room, you can adjust the

orientation of the inner air flow blades on the right-hand side of the

unit, thus increasing the efficiency of the air conditioner.

1 Set the air flow blade swing switch to the on position.

Result:

The inner blades swing automatically left and right.

2 To stop the blades moving left and right, set the air flow blade swing

switch to the off position.

To stop the blades in a specific position and orient the air flow in
the corresponding direction, simply set the switch to the off
position when the blades are in the desired position.

Again depending on the position of the unit in your room, you can adjust the

orientation of the outer air flow blades on the right-hand side of the unit.
RECOMMENDATION When... Adjust the blades to face...

Cooling Upwards.

Adjust the air flow blades to the desired position, by pushing them
upwards or downwards.

Temperature and Humidity Ranges

The following table indicates the temperature and humidity ranges

within which the air conditioner can be used.

Mode

Indoor Temperature

Outdoor Temperature Indoor Humidity

If the air conditioner is used at...

Then...

Higher temperature

Lower temperature

Higher humidity levels

The automatic protection feature may be triggered

and the air conditioner stopped.
A water leakage or some other malfunction may happen

if the heat exchanger freezes.
Water may condense on and drip from the surface of the unit
if it is used for long periods.

Cooling 21 C to 32 C approx. 21 C to 43 C approx. 80% or less