Samsung AD19A1(B1)E12 ユーザーズマニュアル

◆ Heating temperature
◆ Fan speed when heating

If necessary, press the      (On/Off) button.

Result:

◆

The OPERATION indicator on the indoor unit comes on.

◆

The air conditioner starts up in the mode selected when 

the unit was last used.

◆

The indoor unit beeps.

The air conditioner is fitted with a protection mechanism
to prevent the unit from being damaged when it is started
immediately after being:

◆

Plugged in

◆

Stopped

It will start up normally after a three-minute.

If the      indication is not displayed at the top of the remote control,
press the       button on the remote control one or more times until it
appears.

Result:

◆

The indoor unit beeps each time you press      . 

◆

The air conditioner starts up in Heat mode.

N

N

N

N

o

o

o

o

tt

tt

e

e

e

e

You can change modes at any time.

To adjust the temperature, press the       or 

buttons one or more 

times until the required temperature is displayed.
Possible temperatures are between 16°C and 30°C inclusive.

Result:

◆

Each time you press       or 

: 

- The temperature is adjusted by 1°C
- The indoor unit beeps

◆

The air conditioner starts heating, provided that the room 

temperature is lower than the desired temperature

(selected temperature+3°C); the fan will, however, operate.

Select the fan speed by pressing the       button one or more times
until the required setting is displayed:

Low

Medium

High

Automatic

Result:

◆

Each time you press       , the indoor unit beeps.

◆

For the first three to five minutes, the fan operates very 

slowly until the air has been sufficiently warmed. Once the
correct temperature has been reached, the fan is 
automatically set to the required speed.

To control the direction of the air flow, refer to page 15.

E-

11

ENGLISH