DeLonghi WE 115 ユーザーズマニュアル

5

•  If  you  have  a  sash  window,  place  the  win-

dow bracket (T) on the window sill, extend
the window bracket fully within the window 
frame, fix the window bracket by using the
locking pin then lower the window onto the 
window  bracket.  Insert  the  window  outlet  
(N) of the exhaust hose (K) into the slot, then
connect the hose to the air conditioner (fig.
4).

•  Thanks  to  the  locking  pins,  it’s  possible  to

use the window bracket also for sliding win-
dows. Position the hole of the window bra-
cket so to allow a correct installation of the 
exhaust hose (see figure 5).

The instructions below will enable you to prepare
your  air  conditioner  for  operation  as  efficiently
as possible.
Before use, make sure the air intake and outlet
grilles are unobstructed.

Just a few simple steps and your comfort is en-
sured with your appliance:
•  Fit the air exhaust hose in the housing at the

back of the appliance (fig. 1).

•  Fit the window outlet (N) to the end of the

hose (K).

•  Place  the  air  conditioner  near  a  window  or

French window.

•  Adjust  the  length  of  the  hose  to  reach  the

window.

•  Make sure the air exhaust hose is unobstruc-

ted.

•  Open the window or French window slightly

and position the outlet (fig. 2).

•  If you have a double window, use the sucker

(Q) provided to hold the two parts of the win-
dow together (fig. 3).

  2

3

  1

4

  5