Sunpentown Intl WA-7500M ユーザーズマニュアル

6

7

•  The supplied exhaust hose can be

extended from 1 foot to 5 feet
for mounting.  It is recommended that
you use the shortest possible length of hose.

•  Take care to prevent any kink or

bend in the middle of the exhaust
hose, as this will trap hot exhaust air,
which will radiate back into the room.

The length of the exhaust pipe is specially designed 
according to the specification of this product.

Do not replace or extend it with your own hose
as this could cause the unit to malfunction.

This unit is a portable air conditioner.  It can be moved from room to room so that the cooling
can follow you anywhere.  Fitting the exhaust hose is easy, through a window or wall.
Please refer to either of the following ways:

• Connect the supplied foam strips with the exhaust pipe, let the hot air flow to the outside.

• Should the foam strip(s) be too large, cut off the extra part to fit the window.

• Make a hole (4

3

/

8

" in diameter) in the wall to fit the supplied round connector.

• Fit the hose directly to the round connector.

• When the hole is not in use, use the cap for the round connector to cover the hole.

1.  Remove the filter frame from the unit.

2. Separate the filter from the filter frame.

3. Remove the active carbon filter 

from its plastic bag.

4. Insert the active carbon filter 

into the filter frame.

5.  Fix the filter by reassembling 

the fixer onto the filter frame.

6.  Re-fit the filter frame

inside the unit.

7.  It is recommended to replace the 

carbon filter every 3 to 6 months.