Ariston 24 MFFI ユーザーズマニュアル

Begin any further entry of a switching time with the “Prog” switch. If your 

entry is incomplete, the segments not yet selected will blink in the 

display. After programming is completed, and you return the time clock 

to the current time display with the “  ” key, the time clock will not 

activate any switching instruction required for the current time. You may 

need to manually select the desired switching state with the “ 

” key. 

Thereafter, as the unit encounters further switching instructions in the 

memory in real time, it will correctly activate all subsequent switching 

instructions. 

With the “ 

” you can change the current setting at any time. The switching 

program already entered is not altered. 

Pressing the “Prog” key displays the programmed switching times until the 

first free memory location appears in the display “– – : – –”. 

If you now press the “Prog” key once again, the number of free memory 

Iocations will be displayed, e.g. “18”. If all memory locations are occupied, 

the display “00” appears. 

Press the “Prog” key repeatedly until the switching time you want to change 

is displayed. You can now enter the new data. See point “Entering the 

switching times”. 

If you end your entry of the switching times by pressing the “Prog” key, then 

the switching time you have entered will be stored and the next memory 

location displayed. 

In addition, a complete switching command is stored automatically after 

around 90 seconds provided no other key is pressed. The time switch then 

enters the automatic operating mode and displays the current time again. 

Press the “Prog” key repeatedly until the switching time you wish to delete 

is shown in the display. Then set to “– –” using the “h” or “m” key and keep 

the “ 

” key pressed down for around 3 seconds. The switching time is now 

erased and the current time is displayed. 

If you press the “+/-1h” and “h” keys at the same time, the time display 

switches into the AM/PM mode. 

Manufacturer: 

Commercial subsidiaries: 

MTS Building 

Damastown Industrial Park 

Hughenden Avenue 

Damastown Avenue 

High Wycombe 

Mulhuddart 

Bucks HP13 5FT 

Dublin 15 

Telephone: (01494) 755600 

Telephone: (01) 810 3723 

Fax: (01494) 459775 

Fax: (01) 810 3727 

Internet: www.mtsgroup.com/uk 

Internet: www.mtsgroup.com/ie 

E-mail: info@uk.mtsgroup.com 

E-mail: info@ie.mtsgroup.com