Energy Tech Laboratories 40 Series ユーザーズマニュアル

1.  Read and understand all instructions, including all those contained in component manufacturers manuals which are 

provided with the appliance before installing, starting-up, operating, maintaining or servicing this appliance.  Keep this 
manual and literature in legible condition and posted near appliance for reference by owner and service technician.

2.  All heating systems should be designed by competent contractors and only persons knowledgeable in the layout and 

installation of hydronic heating systems should attempt installation of any boiler.

3.  All boilers must be installed in accordance with National, State and Local Plumbing, Heating and Electrical Codes and 

the regulations of the serving utilities.  These Codes and Regulations may differ from this instruction manual.  Authorities 
having jurisdiction should be consulted before installations are made.

 

In all cases, reference should be made to the following Standards:

A.  Current Edition of American National Standard ANSI/NFPA 31, “Installation of Oil Burning Equipment”, for 

recommended installation practices.

B.  Current Edition of American National Standard ANSI/NFPA 211, “Chimneys, Fireplaces, Vents, and Solid Fuel 

Burning Appliances”, For Venting requirements.

C.  Current Edition of American Society of Mechanical Engineers ASME CSD-1, “Controls and Safety Devices for 

Automatically Fired Boilers”, for assembly and operations of controls and safety devices.

D.  All wiring on boilers installed in the USA shall be made in accordance with the National Electrical  Code and/or 

Local Regulations.

A.  Current Edition of Canadian Standards Association CSA B139, “Installation Code for Oil Burning Equipment”, 

for recommended Installation Practices.

B.  All wiring on boilers installed in Canada shall be made in accordance with the Canadian Electrical Code and/or 

Local Regulations.