Martin Fireplaces VFCS20SNV ユーザーズマニュアル

ページ / 32
18 
58D6003
PIL
OT
OFF
REMO
TE C
ONTROL 
Left 
Bottom  
Log #2
Back Log 
#1
Top Left 
Log #4
LOG PLACEMENT
INSTALLING LOGS ON GRATE (See Figure 17) 
1.  Install back log (#1) on rear log support bracket.  
2.  Install left bottom log (#2) on left log support bracket in front 
of back log.
3. Install right bottom log (#3) on right log support bracket in 
front of back log.
4.  Install top left log (#4) on top of left bottom log.
5.  Install top right log (#5) on top of right bottom log.  
Figure 17 - Installing Logs to Grate 
Before you begin 
— This unit is supplied with four ceramic fiber logs. Do not handle these logs with your bare hands. 
Always wear gloves to prevent skin irritation from ceramic fibers. After handling the logs, wash your hands gently with 
soap and water to remove any traces of fibers.
The positioning of the logs are critical to the safe and clean operation of this heater. 
Sooting and other problems may result if the logs are not properly and firmly positioned 
in  the  appliance.  Never  add  additional  logs  or  embellishments  such  as  pine  cones, 
vermiculite or rock wool to the heater. Only use the logs supplied with the unit. 
Failure to position the parts in accordance with diagrams below or to use only parts 
specifically  approved  for  this  heater  may  result  in  property  damage  or  personal 
injury.
W
ARNING
During  initial  operation  of  the  new 
heater, burning logs will give off a paper 
burning smell and orange flames will be 
present. Simply open the windows for 
a few hours to vent the odor.
CAUTION
Right 
Bottom 
Log #3
Right 
Top Log 
#5
Rear Log 
Support 
Bracket 
Left Log 
Support 
Bracket 
Right Log 
Support 
Bracket