Martin Fireplaces VFCS20SNV ユーザーズマニュアル
58D6003
7
GETTING STARTED
MAKE SURE YOU HAVE RECEIVED ALL PARTS:
Carefully inspect the contents for shipping damage. If any parts are missing or damaged, immediately inform the dealer
from whom you purchased the appliance. Do not attempt to install any part of the appliance unless you have all parts
in good condition.
WHAT YOU WILL NEED FOR INSTALLATION:
You must have the following items available before proceeding with installation:
Gloves are recommended when handling ceramic fiber logs to prevent skin irritation
from loose fibers. Logs are fragile--handle with care.
from loose fibers. Logs are fragile--handle with care.
CAUTION
Check your packing list to verify that all listed parts have been received. You should have the following:
• Cast Iron Stove with Burner Assembly
• Installation/Operating Instructions
• Ceramic Fiber Logs
• Touch-up Paint
Millivolt controlled heater designed to be operated with optional devices for ON/OFF functions.
• Hand-Held Remote with Receiver, Manual or Thermostat
• Wall Switch with 15' Wire
• Wall T-stat with 15' Wire
• Stove Mounted Thermostat Control
• Cast Iron Stove with Burner Assembly
• Installation/Operating Instructions
• Ceramic Fiber Logs
• Touch-up Paint
Millivolt controlled heater designed to be operated with optional devices for ON/OFF functions.
• Hand-Held Remote with Receiver, Manual or Thermostat
• Wall Switch with 15' Wire
• Wall T-stat with 15' Wire
• Stove Mounted Thermostat Control
• External regulator (for propane/L.P.G.)
or high pressure natural gas (1 to 2 PSI system)
• Pipe sealant approved for use with propane/L.P.G.
(Resistant to sulfur compounds)
• Piping which complies with local codes
• Manual shutoff valve
• Sediment trap (recommended)
• Tee joint
• Pipe wrench or appropriate wrench set
• Screwdrivers