Heatiator ECO-ADV-WS22 ユーザーズマニュアル

22

Heatilator • ECO-ADV-WS22 • 7057-128C • August 13, 2010

Baffle Boards & Blanket even with 

front tube and resting on tubes

Baffle 

Protection 

Channel

Ceramic Blanket on Top

Tube Channels

2 pc 

Baffle 

Board

Burn 

Rate Air 

Control

1.  Remove all ash from the firebox, and extinguish all hot

embers before disposal into a metal container.

2.  Remove the baffle protection channel by rotating it down

from the front tube.

3.  The baffle board has 2 pieces. With the ceramic blanket

still in place, slide one baffle piece over the top of other

one and pull out top piece through the door opening and

then remove bottom baffle piece.

4.  Remove the ceramic blanket.
5.  Re-install the ceramic blanket and smooth out the blan-

ket.

6.  Slide the baffle pieces one piece at a time underneath the

blanket. Be sure the baffle boards are even with the front

manifold tube and is resting on all tubes.

7.  Re-install the baffle protection channel by rotating it up and

around the front tube so the bottom flange of the channel

rests behind the manifold tube. The baffle boards and

blanket are tucked inside the rear of the baffle protection

channel.