Midland Radio WR-10 Weather Radio ユーザーズマニュアル

 

 

 

1.  Weather Bar Button – This is a push 

"on" button. One push activates the 
weather receiver. 

2.  

Alert Test Button – This is a 

momentary switch bar. Pressing and 
holding it down lets you check to see 
that your WR-10 tone coded alert 
system is operating. A loud siren-type 
sound will be emitted from the 
speaker if the ALERT switch is set to 
LED & ALARM 

3.  Alert Bar Button – This is a push on 

switch. It switches the special alert 
tone coding system on so you can 
receive emergency weather 
broadcasts. In the AM-FM mode it 
also acts as the on switch for the AM- 

FM radio if you have activated the weather receiver. 

 

4.  Alert LED Indicator – This light emitting diode visual indicator tells you when the unit is in 

the alert mode. It is normally a steady light. If an emergency broadcast is received

 

this 

indicator will pulse on and off. 

 

5.  Tuning Dial – This dial lets 

you select AM or FM stations. 

 

6.  WX-AM-FM  Mode Switch – 

Lets you select AM 
broadcasts, FM broadcasts or 
weather band broadcasts. 

 
 

7.  Telescopic Antenna – Extends fully for best reception. 

 
 
 
 
 
 
 
 
 

 

8.  Off/On/Volume Control – This is the volume control and the main power switch. It lets you 

adjust volume to the desired listening level. 

9.  External Alert Device Jack – Allows connection of external alerting devices such as X-10. 
10.  External Antenna – Allows you the option to plug in an optional external antenna for better 

reception inside your home or car, or from distant weather stations. 

11.  Power Jack – A power jack is located on the side of the unit for use with an  AC adapter or 

optional 12 Volt adapter.