Radio Shack 12-896 プリント

ページ / 1
AM/FM
Shower Radio
with LCD Alarm Clock
12-896
What’s Included
Specifications
Battery Installation
This shower radio requires two AA batteries (not 
supplied) for power, and one LR44 button-cell 
battery (supplied) for clock functions.
1. Loosen the screw, and remove the battery 
compartment cover.
2. Remove the insulation strip from the button-cell 
battery to start the clock function.
3. Insert two AA batteries according to the polarity 
markings (+ / -).
4. Replace the cover, and secure the screw.
To replace the button-cell battery, remove the AA 
batteries, use a flat screwdriver to remove the old 
LR44 button-cell, then insert a new one according to 
the polarities (+/ -) marked inside, and reinstall the 
AA batteries.
LR44 battery 
compartment
Rear
View
MODE
SET
Screw
Cover
Frequency Range ............................. AM 530 – 1700KHz
............................................................ FM 88 – 108MHz
Output Power....................................................... 180mW
Speaker ............................................................... 4 Ohm
Weight
12.20 Oz. (350 g.)
Specifications are typical. Individual units may vary. Specifications are 
subject to change and improvement without notice.
Step One
AM/FM radio •  LR44 battery (installed) •
Neck strap (attached) • 
This document
©2003. RadioShack Corporation.
12-896
All Rights Reserved.
Printed in the Philippines
RadioShack and RadioShack.com are
07A03
 trademarks used by RadioShack Corporation.
This product is warranted by RadioShack against manufacturing defects in material and workmanship 
under normal use for one (1) year from the date of purchase from RadioShack company-owned stores 
and authorized RadioShack franchisees and dealers. EXCEPT AS PROVIDED HEREIN, RadioShack 
MAKES NO EXPRESS WARRANTIES AND ANY IMPLIED WARRANTIES, INCLUDING THOSE OF 
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO 
THE DURATION OF THE WRITTEN LIMITED WARRANTIES CONTAINED HEREIN. EXCEPT AS 
PROVIDED HEREIN, RadioShack SHALL HAVE NO LIABILITY OR RESPONSIBILITY TO CUSTOMER 
OR ANY OTHER PERSON OR ENTITY WITH RESPECT TO ANY LIABILITY, LOSS OR DAMAGE 
CAUSED DIRECTLY OR INDIRECTLY BY USE OR PERFORMANCE OF THE PRODUCT OR ARISING 
OUT OF ANY BREACH OF THIS WARRANTY, INCLUDING, BUT NOT LIMITED TO, ANY DAMAGES 
RESULTING FROM INCONVENIENCE, LOSS OF TIME, DATA, PROPERTY, REVENUE, OR PROFIT 
OR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, EVEN IF RadioShack 
HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
Some states do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of 
incidental or consequential damages, so the above limitations or exclusions may not apply to you.
In the event of a product defect during the warranty period, take the product and the RadioShack sales 
receipt as proof of purchase date to any RadioShack store. RadioShack will, at its option, unless 
otherwise provided by law: (a) correct the defect by product repair without charge for parts and labor; (b) 
replace the product with one of the same or similar design; or (c) refund the purchase price. All replaced 
parts and products, and products on which a refund is made, become the property of RadioShack. New 
or reconditioned parts and products may be used in the performance of warranty service. Repaired or 
replaced parts and products are warranted for the remainder of the original warranty period. You will be 
charged for repair or replacement of the product made after the expiration of the warranty period.
This warranty does not cover: (a) damage or failure caused by or attributable to acts of God, abuse, 
accident, misuse, improper or abnormal usage, failure to follow instructions, improper installation or 
maintenance, alteration, lightning or other incidence of excess voltage or current; (b) any repairs other 
than those provided by a RadioShack Authorized Service Facility; (c) consumables such as fuses or 
batteries; (d) cosmetic damage; (e) transportation, shipping or insurance costs; or (f) costs of product 
removal, installation, set-up service adjustment or reinstallation.
This warranty gives you specific legal rights, and you may also have other rights which vary from state to 
state
RadioShack Customer Relations, 200 Taylor Street, 6th Floor, Fort Worth, TX 76102
12/99
Limited 1 Year Warranty
Ô
 
BATTERY NOTES
 
Ô
 
Dispose of old batteries promptly and properly. 
Do not burn or bury batteries.
Use only fresh batteries of the required size and 
recommended type.
Do not mix old and new batteries, different types of 
batteries (standard, alkaline, or rechargeable), or 
rechargeable batteries of different capacities.
If you do not plan to use the radio for  several weeks, 
remove the batteries. Batteries can leak chemicals that can 
damage electronic parts.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following 
two conditions: (1) this device may not cause harmful interference, and (2) this device 
must accept any interference received, including interference that may cause undesired 
operation.
FCC Information
The radio is water resistant, but not waterproof. 
Do not hang it where water can wash over it. Use 
and store the radio only in room temperature 
environments. Handle the radio carefully; do not 
drop it. Keep the radio away from dust and dirt, and 
wipe it with a damp cloth occasionally to keep it 
looking new.
Care
Hanger — 
Rotate this into 
position to hold 
clothes or 
towels.
VOL. OFF — 
Rotate to turn 
the radio on or 
off, and to 
adjust sound 
levels.
TUNING — 
Rotate to select 
the station you 
want to hear.
AM FM — Set 
this switch to 
select the 
band you want 
to hear.
Setting the Alarm, Date, and Time
1. Press SET. The current alarm time flashes, and 
AL
 appears.
2. Repeatedly press MODE to enable or disable the alarm and chime. 
appears 
when the chime is on.
appears when the alarm is on.
3. Press SET. The hour digits for alarm flash. Repeatedly press MODE to adjust the 
hour. The alarm hour appears in 12-hour mode, 
P
 appears for a PM hour and 
appears for a AM hour.
4. Press SET again. The minute digits for alarmflash. Repeatedly press MODE to 
adjust the minute. The alarm time is now set. Press SET to confirm.
5. Press SET four times to set the date. The month digits appear. Repeatedly press 
MODE to set the month.
6. Press SET again. The day digits appear. Repeatedly press MODE to set the day.
7. Press SET again to confirm and set the time of day. Press MODE to adjust the 
hour. In this mode, the clock appears in 12-hour mode, 
P
 appears for a PM hour 
and 
A appears for a AM hour. If you want to use 24-hour mode, repeatedly press 
MODE to select the desired mode. 
8. Press SET again. The current minute digits appear. Repeatedly press MODE to 
adjust the minute.
9. Press SET again to confirm the setting and return to the time of day. Press MODE 
to start the clock function.
If you enabled the alarm and chime, at the alarm time a tone will sound repeatedly for 
approximately one minute. If you have only enabled the chime, a tone will sound once 
at the top of each hour (for example, 11:00, 12:00, etc.).
To display the alarm time, date, or seconds, repeatedly press MODE.
Step Two