Roberts Radio RD-45 ユーザーズマニュアル

9

1

As time passes new stations may become available. To find new stations

proceed as follows:-

1.  Press and release the 

Auto Tune button, your radio will perform a 

scan of the UK DAB frequencies. As new stations are found the station

counter on the right-hand side of the display will increase and stations 

will be added to the list.

2.  To carry out a full scan of the entire DAB Band III frequencies press

and hold down the 

Auto Tune button for more than 2 seconds and 

then release. The station counter on the right-hand side of the display 

will increase and stations will be added to the list.

1.  Press  and  release  the  Info  button  until  the  display  shows  signal 

strength. 

2.  Position your radio and carefully angle  the telescopic aerial for best 

reception using the signal strength display as a  guide. Move your 

radio around and position so as to give maximum number of black 

rectangles  on  signal  strength  display.  The  clear  unfilled  rectangle

indicates minimum signal level required for satisfactory reception.

3.  Press the Info button to exit the signal strength display.

2

1,3