Tyco Electronics MM23016 ユーザーズマニュアル
MM23016, Rev. C
12
Install the radio’s antenna (refer to Table 2-1 for applicable antenna part numbers) in the center of the
vehicle’s roof. These mobile antenna installation guidelines are limited to metal body motor vehicles or
vehicles with appropriate ground planes. The antenna installation should additionally be in accordance
with the following:
vehicle’s roof. These mobile antenna installation guidelines are limited to metal body motor vehicles or
vehicles with appropriate ground planes. The antenna installation should additionally be in accordance
with the following:
•
The requirements of the antenna manufacturer/supplier included with the antenna.
•
Instructions in the M7200 Radio Installation Manual, including minimum antenna cable lengths.
•
The installation manual providing specific information of how to install the antennas to facilitate
recommended operating distances to all potentially exposed persons.
recommended operating distances to all potentially exposed persons.
Use only the M/A-COM approved/supplied antenna(s) or approved replacement antenna. Unauthorized
antennas, modifications, or attachments could damage the radio and may violate FCC regulations.
antennas, modifications, or attachments could damage the radio and may violate FCC regulations.
2.2.2 Mobile Antennas (Motorcycle Installations)
This device must not be co-located or operating in conjunction with any other antenna or
transmitter.
transmitter.
Table 2-2: Rated Power and Recommended Minimum Safe Lateral Distance
(Motorcycle Installations)
RECOMMENDED SAFE MINIMUM LATERAL
DISTANCE FROM TRANSMITTING ANTENNA
MOBILE
RADIO
FREQUENCY
SPLIT
ANTENNA P/N
RATED POWER OF
MOBILE TWO-WAY
MOBILE TWO-WAY
RADIO
CONTROLLED
UNCONTROLLED
806-870 MHz LE-OM806HDBKTNCDS
15W
15 cm
41 cm
Install the radio’s antenna (refer to Table 2-2 for frequencies and corresponding part numbers of
recommended antennas) on the end of the motorcycle case farthest away from the driver. These mobile
antenna installation guidelines are limited to motorcycles fit with the motorcycle radio case with integral
antenna grounding plane. The antenna installation should additionally be in accordance with the
following.
recommended antennas) on the end of the motorcycle case farthest away from the driver. These mobile
antenna installation guidelines are limited to motorcycles fit with the motorcycle radio case with integral
antenna grounding plane. The antenna installation should additionally be in accordance with the
following.
•
The requirements of the antenna manufacturer/supplier included with the antenna.
•
Instructions in the M7200
Radio and Control Unit Motorcycle Installation Manual, including
minimum antenna cable lengths.
•
The installation manual providing specific information of how to install the antennas to facilitate
recommended operating distances to all potentially exposed persons.
recommended operating distances to all potentially exposed persons.
Use only the M/A-COM approved/supplied antenna(s) or approved replacement antenna(s).
Unauthorized antennas, modifications, or attachments could damage the radio and may violate FCC
regulations.
regulations.