Tyco Electronics MM23016 ユーザーズマニュアル
MM23016, Rev. C
44
Table 8-1: Front Panel Default Controls and Functions
PART
FUNCTION
Power On-
Off/Volume
Control knob
Off/Volume
Control knob
Turn knob clockwise to power on the radio and increase volume.
Turn counter-clockwise to decrease volume and power off the radio.
Mic Connection
Connection for hand-held, hands-free, speaker-mic, or headset.
The Emergency button declares an emergency if enabled through programming.
Ambient Light
Sensor
Sensor
Radio automatically adjusts the display and button backlight brightness level based
on ambient light. Do not block this sensor.
on ambient light. Do not block this sensor.
This rotary switch selects the systems or groups/channels, depending upon
programming.
programming.
This rocker type button is used to display the current SCAN status for a
group/channel and then add or delete the group/channel from the system scan list.
group/channel and then add or delete the group/channel from the system scan list.
Pressing the add/delete button twice while the radio is actively receiving or three
times when the radio is not receiving selects the last scanned channel (Last
Scanned Channel Recall).
times when the radio is not receiving selects the last scanned channel (Last
Scanned Channel Recall).
The primary function of this rocker type button is to scroll through the System list or
the Group/Channel list depending upon programming.
the Group/Channel list depending upon programming.
The secondary function is to increment or decrement items within a list (phone list
for example).
for example).
OPT/OPTION
Toggle a PC programmable feature ON and OFF.
CLR/CLEAR
In Trunked mode, the CLR button exits the current operation and removes all
displays associated with it. The radio and display then return to the group receive
state.
displays associated with it. The radio and display then return to the group receive
state.
In Conventional mode, pressing this button unmutes the receiver so activity on the
selected channel can be monitored. When pressed and held for approximately 3
seconds, this button toggles conventional channel decoding (Channel Guard,
Digital Channel Guard, T99) ON and OFF if programmed for the selected channel.
selected channel can be monitored. When pressed and held for approximately 3
seconds, this button toggles conventional channel decoding (Channel Guard,
Digital Channel Guard, T99) ON and OFF if programmed for the selected channel.
MENU
Primary function - access the menu list. This is a list of additional features that are
not available directly from the keypad.
not available directly from the keypad.
Secondary function - activate a selected item within a list, similar to an enter key.
SCAN
Primary function - toggle scan operation on and OFF.
Secondary function - toggle the keypad buttons between their primary function and
their secondary function.
their secondary function.
Pre-Set buttons
(A, B, & C)
Used to store and recall user-selectable parameters.
SYS
Used to enter the System select mode.
GRP
Used to enter the Group select mode.
STS
Permits the transmission of a pre-programmed status message to an EDACS site.
MSG
Permits the transmission of a pre-programmed message to an EDACS site.
PHN
Used to place telephone calls through the radio by selecting the interconnect
special call function.
special call function.