ONKYO T-4555P ユーザーズマニュアル
28
Changing the Remote ID
If the T-4555P’s remote controller interferes with other
Onkyo components located in the same room, you can
change the remote control ID. You can select remote
control ID #1, #2, or #3. By default, the remote control
ID is set to #1. If you change the ID, you must also
change the ID on the remote controller to match, as
explained below, otherwise, the remote controller won’t
work.
Onkyo components located in the same room, you can
change the remote control ID. You can select remote
control ID #1, #2, or #3. By default, the remote control
ID is set to #1. If you change the ID, you must also
change the ID on the remote controller to match, as
explained below, otherwise, the remote controller won’t
work.
Changing the T-4555P’s Remote ID
Changing the Remote Controller’s ID
Note:
• The remote controller and T-4555P must be set to the
same remote control ID. Otherwise, you won’t be
able to control the T-4555P with the remote control-
ler.
able to control the T-4555P with the remote control-
ler.
1
Press the [SETUP] button.
2
Use the Up and Down Arrow
[
[
]/[
] buttons to select “Hard-
ware Setup,” and then press
[ENTER].
[ENTER].
With some tuner boards, there will
only be one option available and you
won’t need to use the Up and Down
Arrow [
only be one option available and you
won’t need to use the Up and Down
Arrow [
]/[
] buttons.
3
Use the Up and Down Arrow
[
[
]/[
] buttons to select
“Remote ID.”
With some tuner boards, there will
only be one option available and you
won’t need to use the Up and Down
Arrow [
only be one option available and you
won’t need to use the Up and Down
Arrow [
]/[
] buttons.
SETUP
/
/
/
ENTER
Number buttons
RETURN
Remote controller
Remote controller
Remote controller
4
Use the Left and Right Arrow
[
[
]/[
] buttons to change the
remote ID.
You can select ID #1 (default), #2, or
#3.
#3.
5
Press the [SETUP] button.
Once you’ve changed the T-4555P’s
remote ID, the remote controller will
no longer control the T-4555P, so you
must change the remote controller’s ID
to match, as explained below.
remote ID, the remote controller will
no longer control the T-4555P, so you
must change the remote controller’s ID
to match, as explained below.
1
Before changing the remote con-
troller’s ID, change the T-4555P’s
ID first (see above).
troller’s ID, change the T-4555P’s
ID first (see above).
2
Press the remote controller’s
[RETURN] button.
[RETURN] button.
3
While pressing and holding
down the remote controller’s
[RETURN] button, press number
button [1], [2], or [3] for 3 sec-
onds to select ID #1, #2, or #3
respectively.
down the remote controller’s
[RETURN] button, press number
button [1], [2], or [3] for 3 sec-
onds to select ID #1, #2, or #3
respectively.
4
Check whether the remote con-
troller operates the T-4555P
properly.
troller operates the T-4555P
properly.
Remote controller
Remote controller
Remote controller
Remote controller
T-4555P_En.book Page 28 Wednesday, August 9, 2006 3:42 PM