ONKYO T-4555P ユーザーズマニュアル

 

7

 

• If the remote controller doesn’t work reliably, try 

replacing the batteries.

• Don’t mix new and old batteries or different types of 

batteries.

• If you intend not to use the remote controller for a 

long time, remove the batteries to prevent damage 
from leakage and corrosion.

• Flat batteries should be removed as soon as possible 

to prevent damage from leakage and corrosion.

When using the remote controller, point it toward the 
T-4555P’s remote control sensor, as shown below.

 

• The remote controller may not work reliably if the 

T-4555P is subjected to bright light, such as direct 
sunlight or inverter-type fluorescent lights. Keep this 
in mind when installing.

• If another remote controller of the same type is used 

in the same room, or the T-4555P is installed close to 
equipment that uses infrared rays, the remote control-
ler may not work reliably.

• Don’t put anything, such as a book, on the remote 

controller because the buttons may be pressed inad-
vertently, thereby draining the batteries.

• The remote controller may not work reliably if the 

T-4555P is installed in a rack behind colored glass 
doors. Keep this in mind when installing.

• The remote controller will not work if there’s an 

obstacle between it and the T-4555P’s remote control 
sensor.

30˚

30˚

T-4555P

Remote control sensor

Appro

x.

 5 m

T-4555P_En.book Page 7 Wednesday, August 9, 2006 3:42 PM