ONKYO 29400046 ユーザーズマニュアル

En-

If you have any trouble using the UP-HT1, look for a 
solution in this section.

•

Make sure the UP-HT1 is properly connected to 
the UNIVERSAL PORT on your Universal Port-com-
patible Onkyo product.

•

Turn off all devices before connecting to a UNIVER-
SAL PORT.

•

Make sure your amplifier’s volume control is not 
set to minimum.

•

Check all connections and correct as necessary 
(see page 6).

•

Turn off all devices, and then set the UP-HT1’s 
Mode selector to TUNER.

•

This is normal. The UP-HT1 can be controlled only 
by using the Universal Port-compatible Onkyo 
product’s remote controller. (However, some prod-
ucts can control using the front panel’s buttons.)

•

Press the [PORT] remote mode button on your 
remote controller to select the PORT remote 
mode.

•

The exact information displayed depends on your 
Universal Port-compatible Onkyo product. The 
displays shown in this instruction manual serve as 
examples only.

If you can’t resolve an issue yourself, try resetting the 
UP-HT1 as follows before contacting your Onkyo 
dealer.

Connect the UP-HT1 to your Universal Port-compati-
ble Onkyo product. On your Universal Port-compati-
ble Onkyo product, select the PORT input source.