Verilux 571391 ユーザーズマニュアル

Your Verilux lamp is made from high quality materials that will last for many 
years with a minimum of care.

Clean only with a soft dry cloth – DO NOT USE SOLVENTS OR CLEANERS 
CONTAINING ABRASIVES OR AMMONIA.

Before requesting service on your Verilux

®

 lamp, please read the following:

•  Make sure all power connectors, cords and plugs are inserted fully and 

securely.

•  Be sure the bulb is securely seated in the socket (see pages 8 and 9).

•  Make sure there is power to the wall outlet or try another outlet – one that is 

not connected to a dimmer.

Light Won’t 

Come On

Blackening/Darkening 

at Ends of Bulb

Light Flickers

Has the plug come 
loose?
Is the bulb old?

Is the bulb connected 
securely into socket?

Is the bulb new?

Is the bulb old?

Has the plug come 
loose?

Is the bulb connected 
securely to the socket? 

Is the lamp connected 
to a dimmer switch?

Insert plug securely into wall outlet.

Check bulb for blackening/darkening at bottom of spiral where it joins the 
base (an indicator of bulb life) and replace bulb.

Be sure the bulb is securely seated into socket, repeat the bulb 
installation process.

Sometimes when a new bulb is turned on for the first time the tube will 
darken, but this will fade after a few minutes.

With older bulbs, darkening of the tube indicates end of bulb life (this 
doesn’t affect operation except to reduce the amount of light available 
since the phosphor in that area has become inactive). Bulb replacement 
is recommended.

Insert plug securely into wall outlet.

Connect lamp plug only to wall outlet without dimmer switch.

Be sure the bulb is securely seated into the socket, repeat the bulb 
installation process. CAUTION: DISCONNECT LAMP FROM OUTLET 
PRIOR TO REPEATING THE BULB INSTALLATION PROCESS. 

WARNING: To prevent risk of shock or personal injury when 
cleaning lamp, make sure you have turned off and unplugged the 
lamp, and allow suffi cient time for the bulb to cool.