Triarch 31914 プリント

ASSEMBLY  AND  MOUNTING  INSTRUCTION 

                                            For 31914 

Please read the Assembly lnstruction sheet carefully before proceeding.Carefully unpack and 
identify all parts prior to building the unit. Each part is identified on the drawing for reference. 

  
DO NOT DISCARD THE ORIGINAL PACKAGING. If after careful inspection and you must return the item 
for any reason. Please repack the unit using the original carton and inserts. 

 

STEP 1: Unpack all the parts and classify them according to the illustration shown at 

the side.

 

Place the parts on a scratch free surface;

   

 

 

STEP 2: Make sure the power is turned off at the the  

junction box where the fixture is to be installed.  

Secure the mounting strap to the ceiling junction box 

using junction box screws; 

 

STEP 3: Use the wire nuts to connect the positive  

and negative wires. Connect the ground wire to the 

junction box ground port;

   

 

STEP 4: Secure the canopy to the ceiling with the  

knurled ring; 

 

STEP 5: lnstall the loop to the colum; 

 

STEP 6: lnstall center pipe and arms to the fixture 

with nut and ball nut as shown; 

 

STEP 7:Install the tempered glass by using the rubber  

washer and the cap nut screw in position ; 

 

STEP 8: Install the correct bulb(not provided) ; 

 

STEP 9: Install threaded nipple to the fixture glass 

Shade ,glass washer and nut secure with bottom   

cap and finial 

 

 

STEP 10: Install candle cover and  fabric shade  

as shown ; 

 

STEP 11: Install the correct bulbs(not provided).