Triarch 31901 プリント

 

 ASSEMBLY AND MOUNTING INSTRUCTION 

                                            For31901 

Please read the Assembly lnstruction sheet carefully before proceeding.Carefully unpack and 
identify all parts prior to building the unit. Each part is identified on the drawingfor reference. 
 
DO NOT DISCARD THE ORIGINAL PACKAGING. If after careful inspection and you must returnthe item 
for any reason. Please repack the unit using the original carton and inserts. 
 
STEP 1:Unpack all the parts and Classify them according to the illustration shown 

at the side.Place the parts on a scratchfree surface;

 

 

 

STEP 2:install center rod,washer to the Fixture 

 

STEP 3: Install correct bulbs(not provided); 

 Washer

Glass Washer

Nut

Fixture

 

 

STEP 4: Install the Glass shade and fix it with 

the Glass washer,and the nus; 

 

STEP 5: Secure with bottom cap and the finial; 

 

STEP 6: Make sure the power is turned off at 

the junction box where the fixture is to be 

installed.Secure the cross bar to the ceiling 

juncton box using junction box screws; 

 

STEP 7: Use the wire nuts to connect the 

positive and negative wires.connect the 

ground wire to the junction box ground 

port; 

 

STEP 8: Secure the fixture to the ceiling with 

the ball nuts.(FOR FLUSH ONLY) 

 

STEP 9: Secure the canopy to the ceiling with 

the Knurled Ring(FOR PENDANT ONLY); 

 

STEP10: Install the Loop to the Fixture;Buckle 

The Quick Links to the Loops;(FOR PENDANT   

ONLY)