Lightolier 2002P1 プリント

Lytecaster

®

Recessed Downlighting

Page 1 of 1

3  3/4" Aperture Incandescent Standard Frame-In Kit 

1. Mounting Frame: .036" (#20 ga.) galvanized steel. Accommodates all

ceilings up to 1" thick. Push-in/twist-out rotoclips hold reflector flush to
ceiling.

2. Junction Box: 4" x 3 1/2”x 2", .063" (#14 ga.) galvanized steel. U.L. listed for

maximum of 8 No. 12 ga. 75° C through branch circuit conductors (60° C for
end of run). Integral cable clamps permit attachment of nonmetallic Romex

®

or armored cable without need of additional connectors.

3. Mounting Bars: .059" (#16 ga.) galvanized steel. 13" long bars extend to 27"

with integral nailing tabs. Attaches to wood joist without need of
accessories.

4. Socket Housing: Aluminum or galvanized steel.
5. Socket: Porcelain medium base; nickel plated screw shell. Pre-wired with

#18 ga. SF1 leads to junction box.

6. Thermal Protector: Meets NEC and UL requirements. Insulation must be

kept 3" away from fixture sides and wiring compartments and must not be
placed above fixture in a manner which will entrap heat.

1964 - 20" set of (2)

1956 - set of (4)

1960 - 7/8" depth for wet plaster ceilings.

7997 - 277V down to 120V 

300W maximum load

UL (Suitable for Damp Locations), I.B.E.W.

Open Downlight

Specular

Cone

Satin Baffles

Pinhole

Wall 

Open 

Wet

Enclosed

Reflector

Cone

Washer

Location Wet 

Location

Romex

®

is a registered trademark of General Cable Industies Inc.

Job Information

Type:

Job Name:
Cat. No.:

Lamp(s):
Notes:

a Genlyte company

www.lightolier.com

631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
© 2006 Genlyte Group LLC • F0806