Ergotron 888-122 ユーザーズマニュアル

1/9

1/2"

7.825

198.755

2.088

53.023

30.125

765.175

12.000

304.800

.888

22.543

27.750

704.850

4X Ø

.500

PILOT HOLE

12.700

PILOT HOLE

X

OUTLINE OF 9" 
VERTICAL LIFT SYSTEM

MOUNTING HEIGHT EQUATION FOR SITTING 

APPLICATIONS:

52.00 (1321MM) - X = H

X =  DISTANCE FROM THE TOP OF THE MONITOR 
SCREEN TO THE CENTER OF THE MOUNTING 
SCREW PATTERN (SEE PICTORIAL)

H = HEIGHT FROM FLOOR TO MOUNTING HEIGHT 
LINE (ABOVE)

MOUNTING HEIGHT LINE:
(OBTAINED BY SOLVING
 EQUATION BELOW)

MOUNTING HEIGHT EQUATION FOR STANDING 

APPLICATIONS:

67.50 (1715MM) - X = H

X = DISTANCE FROM THE TOP OF THE MONITOR 
SCREEN TO THE CENTER OF THE MOUNTING 
SCREW PATTERN

H = HEIGHT FROM FLOOR TO MOUNTING HEIGHT 
LINE (ABOVE)

1. REFER TO THE MANUAL.

2. MEASURE THE DISTANCE FROM THE TOP OF THE MONITOR 

SCREEN TO THE CENTER OF THE MOUNTING SCREW PATTERN.

3. DETERMINE ERGONOMICLLY CORRECT VIEWING HEIGHT BY 

USING EQUATION ABOVE (OR BELOW).

4. MARK THE DETERMINED VALUE FOR H, ON THE WALL.

5. ALIGN MOUNTING HEIGHT LINE TO MARK ON THE WALL. 

USING A LEVEL, LEVEL THE TEMPLATE, THEN TACK IN PLACE.

6. CLEARLY MARK THE POSITIONS FOR FOUR PILOT HOLES 

INTO THE WALL.

7. DRILL THE FOUR PILOT HOLES.

H

H

ERGOTrON

SIZE

DWG.  NO.

D

REV.

DATE

DRAWN

CHECKED

TITLE

C

888-122

MJS

1/21/99

MANUAL,VISUAL GUIDE,TEMPLATE,
TO MOUNT 9" VERTICAL LIFT SYSTEM
TO WALL

OBSOLETE

PART NUMBER

888-122

STATUS

888-122-01

ACTIVE - AS SHOWN

HCS

2

1

1/2"

5/32"

3/32"

3/16"

Ø 1/2" 

(12.8 mm)

8-32 x 1/4"

M4 x 6mm

M4 x 10mm

M4 x 20mm

M4 x 10mm

1/4-20 x 1-1/2"

CAUTION: Do Not remove cardboard spacer until instructed to do so.

2.5mm

888-60-503-G-00 rev. B • 07/08

1/2"