JVC HR-S7960E ユーザーズマニュアル

Filename [HRS7960E4-EN.fm]

Masterpage:Left

Page 44

April 22, 2003 3:07 pm

SYSTEM CONNECTIONS

Connecting To A Satellite Receiver

Simple Connections

This is an example of simple connection if your TV has
one 21-pin AV input (SCART) connector.
Connect the satellite receiver to the AV2 (L-2) IN/
DECODER connector, then connect the AV1 (L-1) IN/
OUT connector to the TV’s connector.

NOTES:

● Set “L-2 SELECT” to “A/V” (

墌

pg. 43).

● You can use Automatic Satellite Programme Recording

function (

墌

pg. 35) with this connection.

● To record a programme via the satellite receiver, select L-2

mode by pressing AUX (number key “0”) and/or PR so that
“L-2” appears on the front display panel.

● For details, refer to the instruction manual of the satellite

receiver.

IMPORTANT

When you set “L-2 SELECT” to “SAT” (

墌

pg. 43), it is possible to view a satellite broadcast with the TV set to its AV mode even if

the recorder is turned off. When the recorder is in Stop mode or recording, press TV/VCR on the remote control to turn off the VCR
indicator on the front display panel.

● If you turn on the recorder when the satellite receiver’s power is off, nothing appears on the TV screen. In this case, turn on the

satellite receiver, or set the TV to its TV mode, or press TV/VCR on the remote control to set the recorder to the video mode.

Outdoor unit

Satellite cable

Satellite receiver

Aerial

TV aerial cable

21-pin SCART connector

Back of TV

ANT. IN

RF OUT

Aerial
connector

Mains outlet

Back of recorder

HRS7960E-EN.book Page 44 Tuesday, April 22, 2003 3:07 PM