JVC HR-S7960E ユーザーズマニュアル

ページ / 68
Filename [HRS7960E5-EN.fm]
Masterpage:Left
62
 
EN
Page 62
April 22, 2003 3:07 pm
Before requesting service for a problem, use this chart and see if you can repair the trouble yourself. Small problems are 
often easily corrected, and this can save you the trouble of sending your video recorder off for repair.
POWER
TAPE TRANSPORT
PLAYBACK
SYMPTOM
POSSIBLE CAUSE
CORRECTIVE ACTION
1. No power is supplied to the recorder.
● The mains power cord is disconnected.
Connect the mains power cord.
2. The clock is functioning properly, but 
the recorder cannot be powered.
● “
#
” is displayed on the front display 
panel with “AUTO TIMER” set to “OFF”.
Press the 
#
 button to turn the “
#
” 
indicator off.
3. The remote control won’t function.
● The batteries are discharged.
Replace the dead batteries with new ones.
SYMPTOM
POSSIBLE CAUSE
CORRECTIVE ACTION
1. During recording, the tape does not 
run. “
” lights up and the channel 
display blinks on the front display 
panel.
● The recorder is in the Record Pause 
mode.
Press 
4
 to resume recording.
2. The tape will not rewind or 
fast-forward.
● The tape is already fully rewound or 
fast-forwarded.
Check the cassette.
SYMPTOM
POSSIBLE CAUSE
CORRECTIVE ACTION
1. The playback picture does not appear 
while the tape is running.
● If you are using the RF connection,
. . . the TV receiver’s channel selector is 
not set to the video channel.
. . . the recorder’s video channel has not 
been correctly set.
If you are using the RF connection,
. . . set the TV receiver to the video 
channel.
. . . perform “Video Channel Set” 
(
pg. 61).
● If you are using the AV connection, the 
TV receiver is not set to the AV mode.
If you are using the AV connection, set the 
TV to its AV mode.
2. Noise appears during visual search.
● This is normal.
3. Noise appears during normal 
playback.
● The automatic tracking mode is 
engaged.
Try manual tracking. (
pg. 23)
4. The playback picture is blurred or 
interrupted while TV broadcasts are 
clear or “USE CLEANING CASSETTE” 
message appears on the screen.
● The video heads may be dirty.
Use a dry cleaning cassette TCL-2 or 
consult your JVC dealer.
5. Breaks are noticeable in Hi-Fi 
soundtrack.
● The automatic tracking mode is 
engaged.
Try manual tracking. (
pg. 23)
TROUBLESHOOTING
HRS7960E-EN.book  Page 62  Tuesday, April 22, 2003  3:07 PM