Marantz SR5005 ユーザーズマニュアル

29

ENGLISH

DEUTSCH

FRANÇAIS

ITALIANO

ESPAÑOL

NEDERLANDS

SVENSKA

ENGLISH

DEUTSCH

FRANÇAIS

ITALIANO

ESPAÑOL

NEDERLANDS

SVENSKA

n

Playing the source (vpage 23 – 27).

• Each time 

 is pressed, the surround mode is switched. 

Which  decoder  can  be  selected  depends  on  the  settings  of  “Amp 

Assign” (vpage 56) or “Speaker Config.” (vpage 56).

DOLBY PLgz 

z

1

This mode is for 7.1-channel surround playback using 

the front height speakers. 

• “PLgz Height” is displayed.

DOLBY PLgx 

z

2

This mode is for 7.1-channel or 6.1-channel surround 

playback using the surround back speakers. 

• “PLgx  Movie”,  “PLgx  Music”or  “PLgx  Game”  is 

displayed.

DOLBY PLg

This mode is for 5.1-channel surround playback. Select 

this mode if no front height speaker nor surround back 

speaker is to be used. 

• “PLg  Movie”,  “PLg  Music”or  “PLg  Game”  is 

displayed.

This mode is for 7.1-channel, 6.1-channel or 

5.1-channel surround playback using the surround 

back speakers. 

• “DTS  NEO:6  Cinema”  or  “DTS  NEO:6  Music”  is 

displayed.

This  mode  is  for  enjoying  stereo  sound  from  all 
speakers.

z

3

This mode is for 7.1-channel, 6.1-channel or 

5.1-channel surround playback using the surround 

back speakers.

• “NEURAL” is displayed.

z

1  This can be selected when the “Amp Assign” (vpage 56) setting 

in the menu is set to “Normal”, and the “Front Speaker Setup” 

setting (vpage 58) is set to “A”.

 

This  cannot  be  selected  when  the  “Speaker  Config.”  –  “Front 
Height” is set to “None”.

z

2  This can be selected when “Amp Assign” is set to “Normal” or 

“Speaker Config.” – “S.Back” is not set to “None”.

z

3  This  mode  supports  analog  2-channel  audio,  and  linear  PCM  2 

channel (44.1 kHz, 48 kHz) audio. 

This unit can play input audio signals in multi-channel surround mode or in stereo mode. 
Select a listening mode suitable for the playback contents (cinema, music, etc.) or according to your liking.

(vpage 29)

For 2-channel signal input:
• Surround-channel  signals  are  created  and  played  with  surround 

playback. 

For multichannel signal input:
• The  surround  signal  recorded  in  source  is  played  as  surround 

playback.  (The  sound  is  played  according  to  the  settings  of  the 
speaker size in “Speaker Config.” (vpage 56).)

• Surround-back-channel or front-height-channel signals that are not 

recorded in source can be created.

(vpage 31)

• If multichannel signals are input, they are mixed down to 2-channel 

audio and are played.

• Subwoofer signal is also output.

(vpage 31)

Sound recorded in source is played as is. 
• Surround back signals or front height signals are not created. 
• In this mode, the following items cannot be adjusted. 

• Tone (vpage 53)

• MultEQ® (vpage 53)

• Dynamic EQ® (vpage 54)

• Dynamic Volume® (vpage 54)

• M-DAX (vpage 55)

playback (vpage 31)

Virtual  Surround  processing  is  performed  on  2-channel  or 
multichannel input signals that are played back. 

• Some listening modes cannot be selected, depending on the audio format or number of channels of the input 

signal. For details, see “Types of input signals, and corresponding surround modes” (vpage 76).

• Adjust the sound field effect with the menu “Surround Parameter” (vpage 52) to enjoy your favorite sound mode. 
• You can select the listening mode by pressing SURROUND MODE on the main unit. 

Press SURROUND MODE and the modes are switched as shown below. 

DOLBY VIRTUAL

DOLBY PLg(x) Music

NEURAL

DOLBY PLg(x) Game

AUTO*(STEREO)

STEREO

DOLBY PLgz

DOLBY PLg(x) Movie

MULTI CH STEREO

DTS NEO:6 cinema

DTS NEO:6 music

 

z

For “AUTO”, press 

 on the amplifier or remote control.