Marantz SR5005 ユーザーズマニュアル
36
ENGLISH
DEUTSCH
FRANÇAIS
ITALIANO
ESPAÑOL
NEDERLANDS
SVENSKA
ENGLISH
DEUTSCH
FRANÇAIS
ITALIANO
ESPAÑOL
NEDERLANDS
SVENSKA
Connect
2.1-channel/2-channel connection
FL
FR
SW
2-channel connection
For 2-channel playback, disconnect the
subwoofers.
subwoofers.
Bi-amp connection
A bi-amp connection is to connect separate amplifiers to the tweeter terminals and woofer terminals
of speakers compatible with the bi-amp function. This prevents the back electromotive force (returned
force without output) of the woofer sent to the tweeter, which affects the sound quality of the tweeter,
and you can enjoy playback with higher-quality sound.
In this case, set “Amp Assign” of “Set up speakers” (vpage 37) to “SPKR-C”.
of speakers compatible with the bi-amp function. This prevents the back electromotive force (returned
force without output) of the woofer sent to the tweeter, which affects the sound quality of the tweeter,
and you can enjoy playback with higher-quality sound.
In this case, set “Amp Assign” of “Set up speakers” (vpage 37) to “SPKR-C”.
FL
FR
w
q
w
q
(R)
(L)
When making a bi-amp connection, the same signal is output from the FRONT A terminal and the SURR.
BACK/AMP ASSIGN terminal.
For surround playback of a multichannel source, if you connect the center speaker, surround speakers
and subwoofers, 5.1-channel playback is available.
BACK/AMP ASSIGN terminal.
For surround playback of a multichannel source, if you connect the center speaker, surround speakers
and subwoofers, 5.1-channel playback is available.
NOTE
• Use speakers compatible with bi-amp connections.
• When making bi-amp connections, be sure to remove the short-circuiting plate or wire between the
speaker’s woofer and tweeter terminals.
For speaker impedance and speaker cable connections, see page 4.