Marantz SR5005 ユーザーズマニュアル
42
ENGLISH
DEUTSCH
FRANÇAIS
ITALIANO
ESPAÑOL
NEDERLANDS
SVENSKA
ENGLISH
DEUTSCH
FRANÇAIS
ITALIANO
ESPAÑOL
NEDERLANDS
SVENSKA
Playback
1
Press
Z2
to switch the remote
control operating mode.
The remote control unit switches to the
operating mode for ZONE2.
operating mode for ZONE2.
2
Press
ON
to turn on the ZONE2
power.
The
indicator on the display lights.
• When
STANDBY
is pressed, ZONE2 turns
off.
• Power in ZONE2 can be turned on or off by
pressing
ZONE2 ON/OFF
on the main unit.
3
Press
INPUT
df
.
The audio signal of the selected source
is output to ZONE2.
is output to ZONE2.
• Turn
INPUT SELECTOR
after
pressing
ZONE SELECT
on the
main unit to select an input
source.
source.
When power for both MAIN ZONE and ZONE2 is set to ON, power of
the MAIN ZONE only can be turned off. Press
the MAIN ZONE only can be turned off. Press
STANDBY
.
Adjusting the volume
Use
VOLUME + –
to adjust the volume.
G
Adjustable rangeH – – – –80dB – –40dB – 18dB
(When the “Volume Display” (vpage 60) setting is “Relative”)
G
G
Adjustable rangeH
0 – 41 – 99
(When the “Volume Display” (vpage 60) setting is “Absolute”)
• At time of purchase, “Volume Limit” (vpage 59) is set to “–10dB
• At time of purchase, “Volume Limit” (vpage 59) is set to “–10dB
(71)”.
Turn
MASTER VOLUME
after pressing
ZONE2 SELECT
on the main
unit to adjust the sound volume.
Turning off the sound temporarily
Press
MUTE
.
The sound is reduced to the level set at “Mute Level” (vpage 60) in
the menu.
• To cancel, either adjust the volume or press
the menu.
• To cancel, either adjust the volume or press
MUTE
again.
• The setting is canceled when the zone’s power is turned off.