Marantz ES7001 ユーザーズマニュアル

ページ / 25
7
ENGLISH
NAMES AND FUNCTIONS OF PARTS
z
c
v
n
b
m
,
.
⁄3
⁄0
⁄2
⁄1
x
REMOTE CONTROLLER: 
RC002ES
7
 Buttons used for this unit
z POWER button
Press this button to turn on the unit or to 
set it to standby mode.
x Input select buttons
These buttons are used to select the input 
source to be played.
Press the input source button you want 
to play.
c Dolby PL 
II
 button
Press this button to switch the Dolby 
Pro Logic 
II
 sound field environment. 
Each press switches among Pro Logic 
II
 
MOVIE, Pro Logic 
II
 MUSIC and OFF.
Note:
This button functions when the analog 
input signal or 2-ch PCM input signal is 
selected.
v NIGHT MODE button
Press this button when you want to lower 
the volume of the source for cases such as 
movie viewing at night.
As the enhanced parts of the reproduced 
sound are suppressed in this mode, you 
can enjoy the sound without elevating the 
entire volume.
b MODE button
Press this button to listen to the binaural 
recording source.
n BILINGUAL button
Press this button to switch the bilingual 
sound output from the TV when the unit 
receives a high-definition TV broadcast 
(AAC audio signal).
m MAIN VOLUME + button
Press this button to increase the volume 
of the unit.
, MAIN VOLUME – button
Press this button to decrease the volume 
of the unit.
. MUTE button
Press this button to mute the sound 
temporarily. Press it again to restore the 
sound.
⁄0 DIMMER button
Press this button to dim the display 
window. 
⁄1 SUBWOOFER button
T h i s   bu t t o n   i s   u s e d   t o   a c t i va t e   a 
commercially available or the Marantz 
SW7001 subwoofer with a built-in amplifier 
connected to the unit.
Note:
This function is activated at the factory. 
When no subwoofer is connected to 
the unit, press this button to turn off the 
indicator.
⁄2 ELEVATION button
Press this button to switch the height of 
the unit installation position. “L” (lower than 
the TV position) or “H” (higher than the TV 
position) can be selected.
⁄3 SEAT button
[For number of audience]
Press this button once to switch the number 
of the audience between “1P” (one person) 
and “2P” (two or more persons).
[For the viewing/listening distance]
Hold down this button for over 2 seconds to 
switch the distance between the audience 
and the unit from among “2 m or shorter,” 
“Approx. 2 m” and “2 m or longer.”
Notes:
 • When the audience is 2.5 m (98 1⁄2 
inches) or farther away from the unit 
and the viewing/listening distance is 
set to “2 m or longer,” the stereophonic 
effect of the unit may be reduced.
 • When the audience is close 1.5 m 
(59 1/8 inches) or less to the unit and 
the viewing distance is set to “2 m or 
shorter,” the stereophonic effect of the 
unit may be reduced.
ES7001_U_01_Eng.indd   7
ES7001_U_01_Eng.indd   7
07.7.31   1:42:33 PM
07.7.31   1:42:33 PM