ONKYO 29344937 ユーザーズマニュアル
42
If you connect a video component to a COMPONENT
VIDEO IN, you must assign that input to an input
selector. For example, if you connect your DVD player
to COMPONENT VIDEO IN 2, you must assign
COMPONENT VIDEO IN 2 to the DVD/BD input
selector.
VIDEO IN, you must assign that input to an input
selector. For example, if you connect your DVD player
to COMPONENT VIDEO IN 2, you must assign
COMPONENT VIDEO IN 2 to the DVD/BD input
selector.
Notes:
• If you connect an input component (such as UP-A1
• If you connect an input component (such as UP-A1
series Dock that seated iPod or iPhone) to the
UNIVERSAL PORT jack, you cannot assign any
input to PORT selector.
UNIVERSAL PORT jack, you cannot assign any
input to PORT selector.
• This procedure can also be performed on the AV
receiver by using its [SETUP] button, arrow buttons,
and [ENTER] button.
and [ENTER] button.
Component Video Input Setup
Input selector
Default assignment
DVD/BD
IN1
VCR/DVR
- - - - -
CBL/SAT
IN2
AUX
- - - - -
TV/TAPE
- - - - -
CD
- - - - -
PORT
- - - - -
1
Press the [RECEIVER] button,
followed by the [SETUP] button.
followed by the [SETUP] button.
2
Use the Up and Down [
q]/[w]
buttons to select “1. Input
Assign”, and then press
[ENTER].
Assign”, and then press
[ENTER].
SETUP
RECEIVER
qwer
ENTER
3
Use the Up and Down [
q]/[w]
buttons to select
“1-2. Component”, and then
press [ENTER].
“1-2. Component”, and then
press [ENTER].
4
Use the Up and Down [
q]/[w]
buttons to select an input
selector, and use the Left and
Right [
selector, and use the Left and
Right [
e]/[r] buttons to select:
IN1: Select if the video component
is connected to
COMPONENT VIDEO IN 1.
COMPONENT VIDEO IN 1.
IN2: Select if the video component
is connected to
COMPONENT VIDEO IN 2.
COMPONENT VIDEO IN 2.
- - - - -: Select if you’re not using the
COMPONENT VIDEO
OUT.
OUT.
5
Press the [SETUP] button.
Setup closes.
Setup closes.