ONKYO 29344934 ユーザーズマニュアル

17

Notes:
• If the remote controller doesn’t work reliably, try 

replacing the batteries.

• Don’t mix new and old batteries or different types of 

batteries.

• If you intend not to use the remote controller for a long 

time, remove the batteries to prevent damage from 
leakage or corrosion.

• Expired batteries should be removed as soon as 

possible to prevent damage from leakage or corrosion.

When using the remote controller, point it toward the AV
receiver’s remote control sensor, as shown below.

Notes:
• The remote controller may not work reliably if the AV 

receiver is subjected to bright light, such as direct 
sunlight or inverter-type fluorescent lights. Keep this 
in mind when installing.

• If another remote controller of the same type is used in 

the same room, or the AV receiver is installed close to 
equipment that uses infrared rays, the remote 
controller may not work reliably.

• Don’t put anything on top of the remote controller, 

such as a book or magazine, because a button may be 
pressed continuously, thereby draining the batteries.

• The remote controller may not work reliably if the AV 

receiver is installed in a rack behind colored glass 
doors. Keep this in mind when installing.

• The remote controller will not work if there’s an 

obstacle between it and the AV receiver’s remote 
control sensor.

Approx. 16 ft. 
(5 m)

Remote control sensor

STANDBY indicator

AV receiver

HT-S5200_En.book  17 ページ  ２００９年３月９日　月曜日　午後４時３１分