ONKYO 29344934 ユーザーズマニュアル
61
Operating Notes:
• Before selecting a different input source, stop iPod
• Before selecting a different input source, stop iPod
playback to prevent the AV receiver from selecting the
iPod input source by mistake.
iPod input source by mistake.
• If any accessories are connected to your iPod, the AV
receiver may not be able to select the input source
properly.
properly.
• While your iPod is in the Dock, its volume control has
no effect. If you adjust your iPod models volume
control while it’s in the Dock, make sure it’s not set
too high before you reconnect your headphones.
control while it’s in the Dock, make sure it’s not set
too high before you reconnect your headphones.
■ Using Your iPod models Alarm Clock
You can use your iPod models Alarm Clock function to
automatically turn on your iPod and the AV receiver at a
specified time. The AV receiver’s input source will
automatically be set to the [PORT] selector.
You can use your iPod models Alarm Clock function to
automatically turn on your iPod and the AV receiver at a
specified time. The AV receiver’s input source will
automatically be set to the [PORT] selector.
Notes:
• To use this function, your iPod must be in the Dock,
• To use this function, your iPod must be in the Dock,
and the Dock must be connected to the AV receiver.
• When you use this function, be sure to set the AV
receiver’s volume control to a suitable level.
• The AV receiver may take several seconds to startup,
so you might not hear the first few seconds of the first
song.
song.
■ Charging Your iPod models Battery
The Dock charges your iPod models battery while your
iPod is in the Dock and connected to the PORT jacks on
the AV receiver. While your iPod is seated in the Dock,
its battery will be charged when the AV receiver is set to
“On” or “Standby”.
The Dock charges your iPod models battery while your
iPod is in the Dock and connected to the PORT jacks on
the AV receiver. While your iPod is seated in the Dock,
its battery will be charged when the AV receiver is set to
“On” or “Standby”.
Note:
When UP-A1L is connected, the power consumption on
standby mode slightly increases.
When UP-A1L is connected, the power consumption on
standby mode slightly increases.
To control your iPod when it’s seated in the UP-A1L
Dock, which is connected to the HT-R570’s PORT jack,
press the [PORT] button.
You can control your iPod when “PORT” is selected as
the input source.
Dock, which is connected to the HT-R570’s PORT jack,
press the [PORT] button.
You can control your iPod when “PORT” is selected as
the input source.
Note:
For detailed operation of the iPod, please refer to the
instruction manual.
For detailed operation of the iPod, please refer to the
instruction manual.
a Arrow [q]/[w] and ENTER buttons
Used to navigate menus and select items.
b Previous [7] button
Restarts the current song. Press it twice to select the
previous song.
previous song.
c Rewind [5] button
Press and hold to rewind.
d Pause [3] button
Pauses playback.
e REPEAT button
Used with the repeat function.
Controlling iPod
h
g
k
j
l
m
n
m
n
i
a
f
b
d
c
e
o
Press [PORT] button first
HT-S5200_En.book 61 ページ ２００９年３月９日 月曜日 午後４時３１分