Runco SC-35d ユーザーズマニュアル

The Auto Color Enable and Test Pattern Enable checkboxes let you choose what to 
display on-screen while making these adjustments. These controls work together as 
follows:
 

• YCM (Yellow, Cyan, Magenta): To precisely adjust the secondary color points 

associated with the custom color gamut, choose YCM from the PCE sub-menu. Each 
control operates only on the color specified. Surrounding colors are linearly interpolated 
based on their distance from each of these colors. 

• Lamp: Select Lamp from the Display Color - Projector Settings menu to adjust the 

projector lamp brightness. 

• Power (230W or 260W): To supply a constant wattage to the lamp, select Power 

(230W or 260W) from the Lamp menu to set the lamp power level. You can choose 
to run the lamp as bright as possible (this is the default setting) or you can choose a 
lower setting. Generally, lower lamp output prolongs the life of a lamp, but 
decreases brightness. 

Off

Off

When both boxes are unchecked, the input 
signal (normal picture) appears on the 
display.

Off

On

When only the Test Pattern Enable box is 
checked, a white “curtain” test pattern 
appears instead of the input signal.

On

Off

When only the Auto Color Enable box is 
checked, the input signal appears on the 
display. 

When you select a red, green, blue, yellow, 
cyan or magenta color point to adjust, the 
Dimension Digital Controller displays only 
that color channel. When you select a white 
point x- or y-value, all colors are visible 
(normal picture). 

On

On

When both boxes are checked, the 
Dimension Digital Controller automatically 
displays a red, green, blue, yellow, cyan, 
magenta or white “curtain” test pattern 
when you select an x- or y-value for that 
color point to adjust.

YCM

Yellow x

0.419

Yellow y

0.505

Cyan x

0.225

Cyan y

0.329

Magenta x

 0.321

Magenta y

 0.154

7

Auto Color Enable

7

Test Pattern Enable