Runco SC-30d ユーザーズマニュアル
Runco SC-30d/SC-35d Installation/Operation Manual
85
PRE
L
IMINAR
Y
• Splash Enable: When you have finished customizing the splash screen, select Splash
Enable from the Splash Configure menu. Then, select On and press ENTER.
OSD Position: To adjust the position of the OSD, select OSD Position from the
Calibration menu and press ENTER.
Calibration menu and press ENTER.
Press
or
to select “Hor.” or “Ver.” Then, press
or
to change the position.
Use the Service menu to access advanced projector configuration settings. This menu
should be used by ISF-certified technicians only.
should be used by ISF-certified technicians only.
Test Video: Select Test Video from the Service Menu to access the internal test patterns
on the Dimension Digital Controller. Table 4-4 lists the available test patterns and
describes their suggested usage.
on the Dimension Digital Controller. Table 4-4 lists the available test patterns and
describes their suggested usage.
Display Device
You must enter a passcode to access the Service menu.
Table 4-4. Test Patterns and Their Suggested Usage
Pattern
Suggested Usage
Color Bars 1
Use this pattern when making
color saturation and tint
adjustments.
color saturation and tint
adjustments.
Color Bars 2
Use this pattern when making
color saturation and tint
adjustments.
color saturation and tint
adjustments.
Focus
Use this pattern when adjusting
the focus.
the focus.
Note