Sony HTSS370 ユーザーズマニュアル

 

 

 

 

This receiver allows you to use Radio Data 
System (RDS), which enables radio stations to 
send additional information along with the 
regular program signal. You can display RDS 
information.

• RDS is operable only for FM stations.
• Not all FM stations provide RDS service, nor do 

they provide the same type of services. If you are 
not familiar with the RDS services in your area, 
check with your local radio stations for details.

Simply select a station on the FM 
band using Direct Tuning (page 36), 
Auto Tuning (page 35), or Preset 
Tuning (page 37).

When you tune in a station that provides RDS 
services, the program service name appears on 
the display.

RDS may not work properly if the station you tuned 
to is not transmitting the RDS signal properly or if 
the signal strength is weak.

Each time you press the button, RDS 
information on the display changes cyclically 
as follows:
Program Service name 

t Frequency t  

FM mode

“BRAVIA” Sync is compatible with Sony TV, 
Blu-ray Disc/DVD player, AV amplifier, etc., 
that is equipped with the Control for HDMI 
function.
By connecting Sony components that are 
compatible with the “BRAVIA” Sync using an 
HDMI cable (not supplied), operation is 
simplified as follows:
• One-Touch Play (page 41)
• System Audio Control (page 42)
• System Power Off (page 43)
• Audio Return Channel (ARC) (page 45)
• Theatre Mode (page 46)

Control for HDMI is a mutual control function 
standard used by HDMI CEC (Consumer 
Electronics Control) for HDMI (High-
Definition Multimedia Interface).

• When you connect the receiver to a 

component which does not correspond with 
Sony Control for HDMI function.

• When you connect the receiver and 

components using other than HDMI 
connection.

We recommend that you connect the receiver 
to products featuring “BRAVIA” Sync.

Depending on the connected component, the 
Control for HDMI function may not work. Refer to 
the operating instructions of the component.