Sharp 10P02-MA-NM ユーザーズマニュアル
40
Testing the speaker settings
Adjust the volume to 30 before testing the audio level.
(Page 41)
(Page 41)
Press a/b/c/d to select “Test Start”, then
press ENTER.
press ENTER.
A test tone is outputted from each speaker in the
following order.
L
following order.
L
➝C➝R➝RS➝LS➝SW
0dB
SW
SW
10ft/0dB
L
L
LS
8ft/0dB
RS
8ft/0dB
10ft/0dB
C
10ft/0dB
R
Test Start
Finish
Return
To select a speaker to be tested, press
a/b/c/d to
select the speaker while the test tone is output.
To stop the test tone, select “Test Tone Stop”.
To stop the test tone, select “Test Tone Stop”.
Adjusting the level
When the sound volume level of each speaker is
uneven, adjusting the level separately.
uneven, adjusting the level separately.
Press a/b/c/d to select the speaker with the
setting you want to adjust, then press ENTER.
setting you want to adjust, then press ENTER.
To select the speaker outputting the test tone, press
ENTER.
Press c/d to select “Level”.
Press a/b to adjust the desired level, then
press ENTER.
Repeat from steps 11 to 13 for each speaker.
Press a/b to adjust the desired level, then
press ENTER.
Repeat from steps 11 to 13 for each speaker.
10ft/0dB
L
L
RS
8ft/0dB
10ft/0dB
C
10ft/0dB
R
0dB
SW
SW
LS
8ft/0dB
10ft
0dB
Distance
Level
Return
Completing the settings
Press a/b/c/d to select “Finish”, then press
ENTER.
Press HOME or EXIT to exit.
Press HOME or EXIT to exit.
10
•
•
•
11
•
12
13
14
14
15
16
16
Before Starting Playback
BD-MPC41U_E.indb 40
BD-MPC41U_E.indb 40
2010/02/04 16:14:41
2010/02/04 16:14:41